Denon POA-A1HD Owner's Manual download pdf (Page 97)



Getting Started Connections Setup Playback Remote Control Multi-Zone Information

Symptom Cause Countermeasure Page

No sound is

produced from

center speaker.

• You are playing a monaural

source (TV, AM radio broadcast,

etc.) in the “STANDARD” (Dolby/

DTS Surround) or “HOME THX

CINEMA” mode.

• The mode is set to something

other than “STANDARD” (Dolby/

DTS Surround) or “HOME THX

CINEMA” .

46, 47

No sound

is produced

from surround

speakers.

• The surround mode is set to

“STEREO”, “DIRECT” or “PURE

DIRECT”.

• Set to a surround playback

mode.

46 ~ 48

No sound is

produced from

surround back

speaker.

• Surround back speaker setting is

set to “None”.

• Surround mode not set to a mode

for 6.1- or 7.1-channel playback.

• Set to something other than

“None”.

• Select a surround playback

mode.

46 ~ 48

No sound is

produced from

subwoofer.

• Subwoofer’s power not turned

on.

• The “Subwoofer” setting at

“Speaker conﬁguration” is set to

“No”.

• The subwoofer is not properly

connected.

• The subwoofer’s volume is

turned off.

• Turn on the subwoofer’s power.

• Set to “Yes”.

• Check the connections.

• Adjust the subwoofer’s volume

to an appropriate level.

–

No test tones are

produced when

main remote

control unit’s TEST

button is pressed.

• Surround mode not set

to “STANDARD” (Dolby/DTS

Surround) or “HOME THX

CINEMA” mode.

• Set to the “STANDARD” (Dolby/

DTS Surround) or “HOME THX

CINEMA” mode.

46, 47

DTS sound is not

output.

• DVD player’s audio output setting

is not set to bitstream.

• DVD player is not compatible

with DTS sound playback.

• The AVP-A1HD’s “Decode

Mode” setting is set to “PCM”.

• Set the DVD player. For details,

refer to the DVD player’s

operating instructions.

• Use a DTS-compatible player.

• Set to the “Auto” or “DTS”

mode.

–

HDMI audio

signals are not

output from

speakers.

• The “Manual Setup” – “HDMI

Setup” – “Audio” setting is set to

“TV”.

• Set to “Amp”. 31

Symptom Cause Countermeasure Page

No sound is

output from

the monitor

connected

with HDMI

connections.

• The “Manual Setup” – “HDMI

Setup” – “Audio” setting is set to

“Amp”.

• Set to “TV”. 31

GAudioH

Symptom Cause Countermeasure Page

The on-screen

display does not

appear.

• The format of the GUI and TV

(PAL or NTSC) do not match.

• Match the format of the GUI and

TV.

No picture

appears.

• The connections between the

AVP-A1HD and monitor are

faulty.

• The monitor’s input setting is

wrong.

• PURE DIRECT mode is set.

• The player is connected using the

component input connectors, the

monitor is connected using the

video (yellow) or S-Video output

connectors.

• Check the connections.

• Set properly.

• Cancel the PURE DIRECT mode.

• High deﬁnition (1080i/720p) and

progressive (480p/576p) video

signals are not down-converted.

Set the player to interlace

(480i/576i) signals.

12, 13

–

No picture

appears

with HDMI

connections.

• The connections to the HDMI

connectors are faulty.

• HDMI input setting is improper.

• The monitor is not compatible

with copyright protection

(HDCP).

• The HDMI format of the player

and monitor do not match.

• Check the connections.

• Check the HDMI input setting.

• Connect a monitor that is

compatible with copyright

protection (HDCP).

• Match the HDMI format of the

player and monitor.

Picture cannot be

recorded.

• Input source does not match

recorder’s video connection

connector (video or S-Video).

• The video conversion function

does not work for the REC

OUT connectors. Match the

input source and recorder

connections.

16, 17

DVDs cannot be

copied on a VCR.

–

• This is not a malfunction. Most

movie software includes copy

prevention signals and cannot be

copied.

–

GVideoH

Troubleshooting

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 116 117

Comments to this Manuals

No comments

Denon POA-A1HD Owner's Manual Page 97

Comments to this Manuals

Related products and manuals for Receiver Denon POA-A1HD