Denon AVR-1306 User Manual download pdf (Page 15)

ENGLISH

System Setup System Setup

ENGLISH

Press the CURSOR

button to select your

subwoofer setting, then press the ENTER or

CURSOR

button to enter the settings and

switch to the Delay Time setting.

*Subwoofer Yes

Yes No

2 Parameters

Large:

Select this when using speakers that have sufficient ability to

reproduce bass sound below the frequency set for the

crossover frequency mode.

Yes / No:

Select “Yes” when a subwoofer is installed, “No” when a

subwoofer is not installed.

Small:

Select this when using speakers that do not have sufficient

ability to reproduce bass sound below the frequency set for the

crossover frequency mode. When this is set, bass sound with

a frequency below the frequency set for the crossover

frequency mode is sent to the subwoofer.

None:

Select this when no speakers are installed.

If the subwoofer has sufficient low frequency playback

capacity, good sound can be achieved even when “Small” is

set for the front, center and surround speakers.

• Select “Large” or “Small” not according to the actual size of

the speaker but according to the speaker’s capacity for playing

low frequency (bass sound below the frequency set for the

Crossover Frequency) signals. If you are unsure, try comparing

the sound at both settings (setting the volume to a level low

enough so as not to damage the speakers) to determine the

proper setting.

Setting the Delay Time

Input the distance between the listening position and each

speaker to set the delay time for the surround playback.

Preparations:

Measure the distances between the listening position and the

speakers.

Center FRFL

Subwoofer

Listening position

SL SR

Press the CURSOR

button to set the

distance from the front L speaker to the listening

position, then press the ENTER or CURSOR

button to switch to the front R speaker setting.

*Front L 3.6m

Press the CURSOR

button to set the

distance from the front R speaker to the listening

position, then press the ENTER or CURSOR

button to switch to the center speaker setting.

Press the CURSOR

button to set the

distance from the center speaker to the listening

position, then press the ENTER or CURSOR

button to switch to the surround L speakers

setting.

Press the CURSOR

button to set the

distance from the surround L speakers to the

listening position, then press the ENTER or

CURSOR

button to switch to the surround R

speaker setting.

Press the CURSOR

button to set the

distance from the surround R speakers to the

listening position, then press the ENTER or

CURSOR

button to switch to the subwoofer

setting.

Press the CURSOR

button to set the

distance from the subwoofer to the listening

position, then press the ENTER or CURSOR

button to enter the setting and switch to the

Subwoofer Mode setting.

• The number changes in units of 0.1 meters each time one of

the buttons is pressed. Select the value closest to the

measured distance.

• The difference in distance for the various speaker settings

must not be greater than 6.0 meters.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 90 91

Comments to this Manuals

No comments

Denon AVR-1306 User Manual Page 15

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Denon AVR-1306