Denon AVR-2802/982 User Manual Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 73
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
ENGLISH
24
When you adjust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode, the channel level adjustments made will affect
ALL surround modes. Consider this mode a Master Channel Level adjustment mode.
After you have completed the SYSTEM SETUP CHANNEL LEVEL adjustments, you can then activate the individual surround modes and
adjust channel levels that will be remembered for each of those modes. Then, whenever you activate a particular surround sound mode,
your preferred channel level adjustments for just that mode will be recalled. Check the instructions for adjusting channel levels within each
surround mode on Page 42.
You can adjust the channel levels for each of the following surround modes: DIRECT, STEREO, 5CH/6CH STEREO, DOLBY/DTS
SURROUND, ROCK ARENA, JAZZ CLUB, VIDEO GAME, MONO MOVIE, and MATRIX.
Setting the digital in assignment
This setting assigns the digital input jacks of the AVR-2802/982 for the different input sources.
1
At the System Setup Menu select Digital In Assignment.
3
4
Select the digital input jack to be assigned to the input source.
To select the input source
To select the digital input jack
Select OFF for input sources for which no digital input jacks are used.
If Ye s is selected for Default, the settings are automatically reset to the default values.
Enter the setting.
The System Setup Menu reappears.
2
Switch to the Digital In Assignment screen.
NOTES:
The OPTICAL 3 jacks on the AVR-2802/982s rear panel are equipped with an optical digital output jack for recording digital signals on a CD
recorder, MD recorder or other digital recorder. Use this for digital recording between a digital audio source (stereo - 2 channel) and a digital
audio recorder.
Do not connect the output of the component connected to the OPTICAL 3 OUT jack on the AVR-2802/982s rear panel to any jack other than
the OPTICAL 3 IN jack.
•“PHONO and TUNER cannot be selected on the Digital In Assignment screen.
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 72 73

Comments to this Manuals

No comments