Denon Professional DN-V750 Operations Instructions download pdf (Page 9)

ENGLISH

PREPARATIONS

2 Checking the accessories

Check that all the accessories are included, referring to the section

“ACCESSORIES”.

2 Mounting on the rack

The DN-V750/V755 is of 1U size, allowing it to be mounted in EIA

standard 19” racks.

To mount the DN-V750/V755 on an EIA standard 19” rack, use a

separately sold mounting kit.

The DN-V750/V755 is 1U size with half the width. Two kits are

available, one for mounting two units of the DN-V750/V755 in the

1U space of a 19” rack, the other for mounting just one unit of the

DN-V750/V755 in the 1U space. For any questions on the

mounting kit, please contact your store of purchase.

NOTE:

When mounting the DN-V750/V755 on the rack, be sure to

use guide rails or shelf boards, etc., on the rack side to

prevent weight from being applied to the front of the DN-

V750/V755.

The weight of the DN-V750/V755 cannot be supported only

with the fittings.

Also take sufficient considerations for the installation

environment, for example with respect to heat from other

devices (use forced ventilation, etc.).

With the DN-V755 in particular, heat is dispersed from the

upper surface, so do not cover the top of the unit.

2 Mounting the feet

Attach the feet to the bottom of the set and at points about 20

mm from the edges (for both sides). Remove the protective

sheets from the bottom of the feet, and press on them from

the top with sufficient strength to attach them.

The feet are press-fitted into the set, so they cannot be

removed once attached.

2 Connecting the AC adapter

Set the DN-V750/V755’s power switch to the OFF

position.

Insert the power cord’s plug into the AC adapter’s AC inlet

side.

Insert the AC adapter’s DC plug into the DN-V750/V755’s

DC jack.

Mount the DC plug disconnection prevention fitting using

the included screw so that the DC plug does not come

disconnected.

Plug the power cord into a power outlet.

POWER

ONOFF

CAUTIONS ON THE AC ADAPTER

• Be sure to use the included AC adapter.

• Be sure to set the DN-V750/V755’s power switch to the OFF

position when plugging in and unplugging the AC adapter.

• Note that plugging in the AC adapter while the set’s power

is turned on may damage the set or the flash memory card.

• Do not pull on the DC plug cord with excessive force when

the DC plug disconnection prevention fitting is connected.

Doing so will damage the DC plug cord, possibly damaging

the set.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 103 104

Comments to this Manuals

No comments

Denon Professional DN-V750 Operations Instructions Page 9

Comments to this Manuals

Related products and manuals for Unknown Denon Professional DN-V750