Denon AVR-1603 User Manual Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
22
ENGLISH
Use the (left) and (right) buttons to set the delay time.
DELAY 30ms
110ms30ms0ms
(Remote control unit)
(right) button(left) button
(3) DELAY TIME
(Initial)
Use the (left) and (right) buttons to set the D. COMP.
D.COMP. OFF
OFF LOW MID HI
(Remote control unit)
(right) button(left) button
(4) D. COMP.
(Initial)
Use the (left) and (right) buttons to set the LFE level.
LFE 0dB
-10dB
0dB
(Remote control unit)
(right) button(left) button
(5) LFE
(Initial)
NOTE: This parameter is displayed during DOLBY DIGITAL playback.
NOTE: This parameter is displayed during DOLBY DIGITAL and DTS playback.
To reset the settings to the factory defaults, use the (left) and (right)
buttons to display Yes.
DEFAULT Y/N
NOY/NYES
(Remote control unit)
(right) button(left) button
(6) DEFAULT
Operating the surround mode and surround parameters from the main units panel.
1
Turn the SELECT knob to select the surround
mode.
(Main unit)
When turned clockwise
DIRECT STEREO DOLBY PRO LOGIC II
5CH STEREO
MONO MOVIE
JAZZ CLUB ROCK ARENAVIDEO GAMEMATRIXVIRTUAL SURROUND
DIRECT STEREO DOLBY PRO LOGIC II
5CH STEREO
MONO MOVIE
JAZZ CLUB ROCK ARENAVIDEO GAMEMATRIXVIRTUAL SURROUND
When turned counterclockwise
To select the surround mode while adjusting the surround parameters, channel volume or tone control,
press the SURROUND MODE button then operate the selector.
(Main unit)
1, 321
2
Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to set.
The parameters which can be set differ for the different surround modes. (Refer to Surround Modes and
Parameters on page 23.)
(Main unit)
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
NOTE:
When playing PCM digital signals or analog signals in the 5CH STEREO, ROCK ARENA, JAZZ CLUB, VIDEO
GAME, MONO MOVIE or MATRIX surround modes and the input signal switches to a digital signal encoded
in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches to a DTS
signal, the mode automatically switches to DTS surround.
Surround parameters e
ROOM SIZE:
This sets the size of the sound field.
There are five settings: small, med.s (medium-small), medium, med.l (medium-large) and large.
small recreates a small sound field, large a large sound field.
EFFECT LEVEL:
This sets the strength of the surround effect.
The level can be set in 15 steps from 1 to 15.
DELAY TIME:
In the matrix mode only, the delay time can be set within the range of 0 to 110 ms.
4
Press the ENTER button to finish surround parameter mode.
(Remote control unit)
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Comments to this Manuals

No comments