Denon AVR-1603 User Manual download pdf (Page 28)

ENGLISH

2 Sources recorded in Dolby Surround are indicated with the logo mark shown below.

Dolby Surround support mark:

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

DTS Digital Surround

Digital Theater Surround (also called simply DTS) is a multi-channel digital signal format developed by Digital Theater

Systems.

DTS offers the same “5.1” playback channels as Dolby Digital (front left, front right and center, surround left and

surround right) as well as the stereo 2-channel mode. The signals for the different channels are fully independent,

eliminating the risk of deterioration of sound quality due to interference between signals, crosstalk, etc.

DTS features a relatively higher bit rate as compared to Dolby Digital (1234 kbps for CDs and LDs, 1536 kbps for

DVDs) so it operates with a relatively low compression rate. Because of this the amount of data is great, and when

DTS playback is used in movie theaters, a separate CD-ROM synchronized with the film is played.

With LDs and DVDs, there is of course no need for an extra disc; the pictures and sound can be recorded simultaneously

on the same disc, so the discs can be handled in the same way as discs with other formats.

There are also music CDs recorded in DTS. These CDs include 5.1-channel surround signals (compared to two

channels on current CDs). They do not include picture data, but they offer surround playback on CD players that

are equipped with digital outputs (PCM type digital output required).

DTS surround track playback offers the same intricate, grand sound as in a movie theater, right in your own listening

room.

2 DTS compatible media and playback methods

Marks indicating DTS compatibility: and .

The following are general examples. Also refer to the player’s operating instructions.

Media

LD (VDP)

DVD

DTS Digital output jacks

Optical or coaxial digital output

(same as for PCM) 2

Optical or coaxial digital output

(same as for PCM) 2

Optical or coaxial digital output

(same as for PCM) 3

Playback method (reference page)

Set the input mode to “AUTO” or “DTS” (page 16).

Never set the mode to “ANALOG” or “PCM”. 1

Set the input mode to “AUTO” or “DTS” (page 16).

Never set the mode to “ANALOG” or “PCM”. 1

Set the input mode to “AUTO” or “DTS” (page 16).

1 DTS signals are recorded in the same way on CDs and LDs as PCM signals. Because of this, the un-

decoded DTS signals are output as random “hissy” noise from the CD or LD player’s analog outputs. If

this noise is played with the amplifier set at a very high volume, it may possibly cause damage to the

speakers. To avoid this, be sure to switch the input mode to “AUTO” or “DTS” before playing CDs or

LDs recorded in DTS. Also, never switch the input mode to “ANALOG” or “PCM” during playback. The

same holds true when playing CDs or LDs on a DVD player or LD/DVD compatible player. For DVDs, the

DTS signals are recorded in a special way so this problem does not occur.

2 The signals provided at the digital outputs of a CD or LD player may undergo some sort of internal signal

processing (output level adjustment, sampling frequency conversion, etc.). In this case the DTS-encoded

signals may be processed erroneously, in which case they cannot be decoded by the AVR-1603, or may

only produce noise. Before playing DTS signals for the first time, turn down the master volume to a low

level, start playing the DTS disc, then check whether the DTS indicator on the AVR-1603 (see page 19)

lights before turning up the master volume.

3 A DVD player with DTS-compatible digital output is required to play DTS DVDs. A DTS Digital Output logo

is featured on the front panel of compatible DVD players. Recent DENON DVD player models feature DTS-

compatible digital output – consult the player’s owner’s manual for information on configuring the digital

output for DTS playback of DTS-encoded DVDs.

“DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.

TROUBLESHOOTING

If a problem should arise,first check the following.

1. Are the connections correct ?

2. Have you operated the receiver according to the Operating Instructions ?

3. Are the speakers, turntable and other components operating property ?

If this unit is not operating properly, check the items listed in the table below. Should the problem persist, there

may be a malfunction.

Disconnect the power immediately and contact your store of purchase.

Symptom Cause Measures Page

DISPLAY not lit and sound

not produced when power

operation switch set to on.

• Power cord not plugged in securely. • Check the insertion of the power cord

plug.

• Turn the power on with the remote

control unit after turning the power

operation switch on.

DISPLAY lit but sound not

produced.

• Speaker cords not securely connected.

• Improper position of the audio function

button.

• Volume control set to minimum.

• MUTING is on.

• Digital signals not input Digital input

selected.

• Connect securely.

• Set to a suitable position.

• Turn volume up to suitable level.

• Switch off MUTING.

• Input digital signals or select input

jacks to which digital signals are being

input.

DISPLAY not displayed and

the power indicator flashes

at a high rate.

• Speaker terminals are short-circuited.

• Block the ventilation holes of the set.

• The unit is operating at continuous high

power conditions and/or inadequate

ventilation.

• Switch power off, connect speakers

properly, then switch power back on.

• Turn off the set’s power, then ventilate

it well to cool it down.

Once the set is cooled down, turn the

power back on.

• Turn off the set’s power, then ventilate

it well to cool it down.

Once the set is cooled down, turn the

power back on.

3, 8

Sound produced only from

one channel.

• Incomplete connection of speaker cords.

• Incomplete connection of input/output

cords.

• Connect securely.

5 ~ 8

Positions of instruments

reversed during stereo

playback.

• Reverse connections of left and right

speakers or left and right input/output

cords.

• Check left and right connections.

This unit does not operate

properly when remote

control unit is used.

• Batteries dead.

• Remote control unit too far from this

unit.

• Obstacle between this unit and remote

control unit.

• Different button is being pressed.

• < and > ends of battery inserted in

reverse.

• Replace with new batteries.

• Move closer.

• Remove obstacle.

• Press the proper button.

• Insert batteries properly.

—

Common problems arising when listening to the

CD, records, tapes, and FM broadcasts, etc.

Remote control unit.

NOTE:

When a subwoofer has been connected and the virtual surround function is being used, the signal played from

the subwoofer channel is LFE only (only when playing Dolby Digital or DTS signals) for initial factory settings

(i.e., the setting of the front speaker is “LARGE” and the setting of the subwoofer mode is “NORM”).

When subwoofer effects are felt to be weak, try setting the subwoofer mode to “+MAIN”, or the front

speaker to “SMALL” in the System setup ”Speaker Configuration” settings.

Making these settings will result in the low-frequency sounds of the front channel being played from the

subwoofer.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 59 60

Comments to this Manuals

No comments

Denon AVR-1603 User Manual Page 28

Comments to this Manuals

Related products and manuals for Acoustics Denon AVR-1603