Denon AVR-983 User Manual download pdf (Page 12)

(

) (

)

(

) (

)

(

) (

)

Speaker system connections

• Connect the speaker terminals with the speakers making sure that like

polarities are matched (≈ with ≈ , √ with √ ). Mismatching of polarities will

result in weak central sound, unclear orientation of the various instruments,

and the sense of direction of the stereo being impaired.

• When making connections, take care that none of the individual conductors

of the speaker cord come in contact with adjacent terminals, with other

speaker cord conductors, or with the rear panel.

NOTE:

NEVER touch the speaker terminals when the power is on.

Doing so could result in electric shocks.

Speaker Impedance

• Speakers with an impedance of from 6 to 16 Ω/ohms can be connected for

use as front and center speakers.

• Speakers with an impedance of 6 to 16 Ω/ohms can be connected for use as

surround speakers.

• Be careful when using two pairs of front speakers (A + B) at the same time,

since use of speakers with an impedance of less than 8 Ω/ohms will lead to

damage.

• The protector circuit may be activated if the set is played for long periods of

time at high volumes when speakers with an impedance lower than the

specified impedance are connected.

Connection the speaker terminals

1. Loosen by turning

counterclockwise

2. Insert the cord. 3. Tighten by turning

clockwise.

Connecting banana plugs

banana plug

Turn clockwise to tighten, then

insert the banana plug.

Connections

• When making connections, also refer to the operating instructions of the other components.

Connection jack for subwoofer

with built-in amplifier (super

woofer), etc.

FRONT SPEAKER

SYSTEMS (A)

CENTER SPEAKER

SYSTEM

• Precautions when

connecting speakers

If a speaker is placed near a

TV or video monitor, the

colors on the screen may

be disturbed by the

speaker’s magnetism. If

this should happen, move

the speaker away to a

position where it does not

have this effect.

SURROUND BACK/ZONE 2 SPEAKER SYSTEMS

SURROUND SPEAKER

SYSTEMS

NOTES:

• To use Surround back with one speaker, connect

the speaker to SURR. BACK L CH.

• The settings must be changed to use this speaker

for ZONE 2.

See page 25.

Either tightly twist or terminate the core wires.

FRONT SPEAKER

SYSTEMS (B)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 75 76

Comments to this Manuals

No comments

Denon AVR-983 User Manual Page 12

Comments to this Manuals

Related products and manuals for Acoustics Denon AVR-983