Denon AVR-983 User Manual download pdf (Page 16)

SETTING UP THE SYSTEM

• Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 6 to 13), make the various

settings described below on the monitor screen using the AVR-2803/983’s on-screen display function.

These settings are required to set up the listening room’s AV system centered around the AVR-2803/983.

• Check that the remote control unit is set to AMP mode (TAPE, CDR/MD or CD).

• The system settings can be reset to the default (factory shipment) settings by initialization of the microprocessor (see page 63).

• Use the following buttons to set up the system:

SYSTEM SETUP button

Press this to display the system setup menu.

ENTER button

Press this to switch the display.

Also use this button to complete the setting.

CURSOR buttons

and

: Use these to move the cursors (

and

) to the left

and right on the screen.

•

and

: Use these to move the cursors (

•

and

) to the up

and down on the screen.

• System setup items and default values (set upon shipment from the factory)

System setup Default settings

Speaker

Configuration

Subwoofer mode

Channel

Level

Digital In

Assignment

On Screen

Display

Input the combination of speakers in your system and their

corresponding sizes (Small for regular speakers, Large for full-size,

full-range) to automatically set the composition of the signals output

from the speakers and the frequency response.

This selects the subwoofer speaker for playing deep bass signals.

This adjusts the volume of the signals output from the speakers and

subwoofer for the different channels in order to obtain optimum

effects.

This assigns the digital input jacks for the different input

sources.

This sets whether or not to display the on-screen display that

appears on the monitor screen when the controls on the remote

control unit or main unit are operated.

Input

source

Digital

Inputs

Front Sp.

Large

Center Sp. Surround Sp. Sub Woofer

Small SmallYe s

LFE

Front L & R Center Surround L & RSub Woofer

12 ft (3.6 m) 12 ft (3.6 m) 10 ft (3.0 m)12 ft (3.6 m)

Front L

Front R Center

Surround

Back R

Subwoofer

0 dB 0 dB 0 dB 0 dB 0 dB 0 dB

CD DVD VDP

DBS V. AUX VCR-1 VCR-2

COAX1 COAX2 OPT1 OPT2 OPT3 OFF OFF OFF

On Screen Display = ON

Surround Back Sp.

Small / 2spkrs

Delay Time

This parameter is for optimizing the timing with which the audio

signals are produced from the speakers and subwoofer according to

the listening position.

SBL & SBR

10 ft (3.0 m)

Surround

Back L

0 dB

Surround

0 dB

TAPE

OPT4

Crossover

Frequency

Set the frequency (Hz) below which the bass sound of the various

speakers is to be output from the subwoofer.

80 Hz

Video In

Assign

This assigns the color difference (component) video input jacks for

the different input sources.

DVD VDP TV

DBS

VCR-1 VCR-2 V. AUX —

VIDEO1 NONE NONE VIDEO2 NONE NONE NONE —

—

Zone 2

Control

Set this to switch the surround back channel’s

power amplifier for use for zone 2.

Surround Back

Power AMP

Assignment

Zone2

vol. Level

This sets the output level for the zone 2 output

jacks.

Variable

Ext. In

Subwoofer

Level

Set the Ext. In Subwoofer terminal playback level. Subwoofer = +15 dB

Auto Surround

Mode

Set the Auto surround mode function.

Auto Surround Mode = ON

Dolby Digital

Setup

Turn the audio compression on or off when down-mixing Dolby

Digital signals.

OFF

Trigger Out

Setup

Set the Trigger Out output for the different input sources.

PHONO CD TUNER

TAPE

DVD VDP TV VCR-1

OFF OFF OFF OFF ON ON ON ON

VCR-2

DBS

V. AUX

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 75 76

Comments to this Manuals

No comments

Denon AVR-983 User Manual Page 16

Comments to this Manuals

Related products and manuals for Acoustics Denon AVR-983