Denon D-M51DVS Operations Instructions download pdf (Page 17)

I:I_[.4|E:_"

The red side is the "+" side, the black side

the "-" side.

To "+" side on amplifier

(copper colored core wire)

NOTE: Make sure the core wires do not

touch each other.

To "-" side on amplifier

(silver colored core wire)

Either twist the core wires

firmly or terminate the wires.

_l_Turn the speaker _2)lnsert the cord's _3)Turn clockwise to

terminal core wires, tighten the

counterclockwis terminal.

e to loosen it.

Connecting banana plugs

When using banana plugs, turn

clockwise to tighten the terminal

before inserting.

• This unit is equipped with a high-speed protection circuit. The purpose ef this circuit is to protect the speakers under circumstances such as

when the eutput of the power amplifier is inadvertently shert-circuited and a large current flows, when the temperature surrounding the unit

becomes unusually high, or when the unit is used at high output ever a long period which results in an extreme temperature rise.

When the protection circuit is activated, the speaker output is cut off and the power supply indicator LED flashes. Should this occur, please

fellow these steps: be sure to switch off the power of this unit, check whether there are any faults with the wiring of the speaker cables or

input cables, and wait for the unit to cool down if it is very hot. Impreve the ventilation conditien areund the unit and switch the power back

on,

If the protection circuit is activated again even though there are no preblems with the wiring or the ventilatien around the unit, switch eff

the power and contact a DENON service center.

• The protecter circuit may be activated if the set is played fer leng periods of time at high volumes when speakers with an impedance lower

than the specified impedance (for example speakers with an impedance of lower than 4 _/ohms) are connected. If the protector circuit is

activated, the speaker eutput is cut off. Turn off the set's power, wait fer the set te coel dewn, improve the ventilation around the set, then

turn the power back on.

• With this unit's speaker outputs, signals with the reverse phase of the "+" side output terminal's signals are alse output from the "-" side

output terminal.

Do not connect to a device fer switching between multiple speakers (a speaker selector or audie channel selecter) er connect in ways ether

than described in this manual. Doing so will result in damage.

1. Set the power switch to the "ON" position.

• When the unit's AC power cord is plugged into a switched AC eutlet en the amplifier, if the power switch is left at the "ON" positien, the

unit's power turns on and off autematically when the amplifier's power is turned on and off.

• If the AC power cerd is net plugged into a switched AC eutlet en the amplifier, set the unit's power switch to the "ON" positien after turning

en the amplifier's power. When turning the power off, set the unit's power switch te the "OFF" pesitbn before turning off the amplifier's power.

2. Adjust the volume using the volume adjustment control.

•_ Fer details, see "PART NAMES AND FUNCTIONS".

.2 The net on the front of the speaker systems (SC-A3L) can be removed.

• Te remove, grasp beth sides ef the net and pull forward.

• To mount, line up the heles in the four corners of the speaker net with the prejecting pieces in the four corners ef the cabinet and press in.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 108 109

Comments to this Manuals

No comments

Denon D-M51DVS Operations Instructions Page 17

Comments to this Manuals

Related products and manuals for Cassette players Denon D-M51DVS