Denon DN-D4500MK2 Owner's Manual download pdf (Page 24)

Getting started Troubleshooting Speciﬁcations Index

Others Preset

Playback

Connection

Setting the cue point

By setting a cue point, the track can be played back from the set position.

n Setting the cue point

Pause the track in the position where you want to set the cue point, and press CUE.

The cue point is set at the paused position.

•Irrespective of the mode, the cue point is set at the start of the track when the track is loaded.

n Returning to the cue point

•Playback stops, returns to the position where you want to playback again (cue point), and is paused

(back cue function).

•When this function is used, playback can always be started from the same position.

During playback, press CUE.

Playback stops, cues to the playback start position (cue point), and pauses.

n Moving the cue point

There are two methods for moving the cue point, using the shuttle ring, or using the jog wheel.

Setting with shuttle ring and jog wheel

During pause, turn the shuttle ring in the forward or reverse direction to move the

cue point while listening to the playback sound.

If the jog wheel is turned in the forward or reverse direction, you can move the cue

point while listening to the playback sound frame by frame.

ENGLISH

DN-D4500 has six pitch ranges,

4%, 10%, *16%, 24%, 50% and

100%.

(*Max MP3) When the

RANGE button !4 is pushed

for more than 1 sec, the pitch

range can be selected by turning

the TRACK SELECT knob o.

• When the TRACK SELECT

knob o is pushed down the

pitch range is entered and

the pitch range selection

mode is completed.

PITCH/BRAKE

(1) Pitch

• There are two ways to change the playing speed.

• Adjust the Pitch using the pitch slider !3.

• The PITCH BEND button !2 or jog wheel y can be used to temporarily change the pitch.

• The playing speed can be changed greatly to achieve effect similar to those achievable with analog vinyl.

• If you wish to preserve the original key of sound, set the Key Adjust function to ON.

1-1

[Pitch slider]

Set the variable speed mode.

Push the PITCH button !4 to light

the PITCH LED.

•

PITCH → KEY (key adjust) → OFF

(Green) (Orange) (Off) (LED color)

The Pitch decreases

when the pitch slider !3

is moved upwards,

increases when the pitch

slider !3 is moved

downwards.

1-2

2-1

[PITCH BEND button]

Push the PITCH BEND + (or

PITCH BEND –) button !2.

• The Pitch increases or

decreases temporarily while the

PITCH BEND + or PITCH BEND

– button !2 is pushed.

• The extent to which the PITCH BEND button

!2 changes the Pitch is proportionate to the

amount of time the button is pushed. The

longer the button is held down, the greater

the percentage of change.

2-2

Set the jog wheel to the pitch bend mode.

During playback, pitch bend is setting for the

Jog wheel.

• The playing speed increases

gradually when the jog wheel

y is turned clockwise and

decreases gradually when the jog

wheel y is turned

counterclockwise. When you stop turning

the jog wheel y, the playing speed returns

to the previous speed.

• When playback is stopped, the jog/shuttle

wheel is set to the search mode.

Pitch

decreases

Pitch

increases

SCAN

1-3

• When the track is selected with the TRACK SELECT knob o and the PLAY/PAUSE button !1 is pushed,

playback starts from the beginning of that track. If you wish to start from a different position, use the

procedure described below to search for the desired position.

(2) Starting playback from the Middle of a track (Manual Search)

Find the play start position.

Turn the shuttle ring !7 to change the

playback position quickly. (Search for the

approximate playback position.)

The fast forward/reverse mode

is set when the shuttle ring

(outer side) !7 is turned.

The speed changes according to

the angle at which the ring is

turned.

• When operated during playback, playback

resumes after the operation.

•When playback is started, the jog wheel is

set to the bend mode.

• When turned fully in either direction, the

playback position jumps about 10 seconds.

The jump time can be selected in the preset

mode from 10, 20, 30 or 60 sec.

Turn the jog wheel y. (Search for the precise

playback position.)

When the jog wheel (inner side)

y is turned, the frame move

mode is set.

The playback position can be

moved in units of one frame.

Listen to the sound and find the desired play

start position.

SCAN

RVS FWD

SCAN

Shockproof memory

•A maximum of approximately 20 seconds

uncompressed audio data is stored into memory

(per drive). This guards audible interruptions due

to external mechanical shocks such as bumps

or other hard vibrations.

• If advanced data reading is not possible due to

scratches or dirt on the disc, playback stops

once the data stored up to that point is read.

RVS FWD

NOTE:

• For MP3 discs, frames are not displayed,

however frame resolution is audible by turning

the jog wheel (inner side) y.

(2) BRAKE

• Use this function to achieve effect similar to analog players.

Push the BRAKE button i to light

the BRAKE LED.

• The effect sound is similar to

a DJ turntable coming to a

quick stop. This effect can

be achieved by pushing the

PLAY/PAUSE button !1

during playback.

RVS FWD

Press CUE.

The cue point is set at the moved position.

Press 13.

The cue point is set at the moved position, and playback starts.

Operations during playback

See the illustration on the previous page for details of the buttons used for the

operations on this page.

Fast forward/Rewind

Therearefourmethodsforfastforward/rewinding.

n Fast forward/Rewind using shuttle ring and jog wheel

During playback, turn the shufe ring.

If turned in the FWD direction, the playback point is moved to the forward direction, and playback is

resumed from the new point.

If turned in the RVS direction, the playbackpoint is moved to the reverse direction, andplayback is

resumed from the new point.

During playback, turn the jog wheel (inner side).

If turned in the FWD direction, the playback speed increases.

IfturnedintheRVSdirection,theplaybackspeeddecreases.

ENGLISH

DN-D4500 has six pitch ranges,

4%, 10%, *16%, 24%, 50% and

100%.

(*Max MP3) When the

RANGE button !4 is pushed

for more than 1 sec, the pitch

range can be selected by turning

the TRACK SELECT knob o.

• When the TRACK SELECT

knob o is pushed down the

pitch range is entered and

the pitch range selection

mode is completed.

PITCH/BRAKE

(1) Pitch

• There are two ways to change the playing speed.

• Adjust the Pitch using the pitch slider !3.

• The PITCH BEND button !2 or jog wheel y can be used to temporarily change the pitch.

• The playing speed can be changed greatly to achieve effect similar to those achievable with analog vinyl.

• If you wish to preserve the original key of sound, set the Key Adjust function to ON.

1-1

[Pitch slider]

Set the variable speed mode.

Push the PITCH button !4 to light

the PITCH LED.

•

PITCH → KEY (key adjust) → OFF

(Green) (Orange) (Off) (LED color)

The Pitch decreases

when the pitch slider !3

is moved upwards,

increases when the pitch

slider !3 is moved

downwards.

1-2

2-1

[PITCH BEND button]

Push the PITCH BEND + (or

PITCH BEND –) button !2.

• The Pitch increases or

decreases temporarily while the

PITCH BEND + or PITCH BEND

– button !2 is pushed.

• The extent to which the PITCH BEND button

!2 changes the Pitch is proportionate to the

amount of time the button is pushed. The

longer the button is held down, the greater

the percentage of change.

2-2

Set the jog wheel to the pitch bend mode.

During playback, pitch bend is setting for the

Jog wheel.

• The playing speed increases

gradually when the jog wheel

y is turned clockwise and

decreases gradually when the jog

wheel y is turned

counterclockwise. When you stop turning

the jog wheel y, the playing speed returns

to the previous speed.

• When playback is stopped, the jog/shuttle

wheel is set to the search mode.

Pitch

decreases

Pitch

increases

SCAN

1-3

• When the track is selected with the TRACK SELECT knob o and the PLAY/PAUSE button !1 is pushed,

playback starts from the beginning of that track. If you wish to start from a different position, use the

procedure described below to search for the desired position.

(2) Starting playback from the Middle of a track (Manual Search)

Find the play start position.

Turn the shuttle ring !7 to change the

playback position quickly. (Search for the

approximate playback position.)

The fast forward/reverse mode

is set when the shuttle ring

(outer side) !7 is turned.

The speed changes according to

the angle at which the ring is

turned.

• When operated during playback, playback

resumes after the operation.

•When playback is started, the jog wheel is

set to the bend mode.

• When turned fully in either direction, the

playback position jumps about 10 seconds.

The jump time can be selected in the preset

mode from 10, 20, 30 or 60 sec.

Turn the jog wheel y. (Search for the precise

playback position.)

When the jog wheel (inner side)

y is turned, the frame move

mode is set.

The playback position can be

moved in units of one frame.

Listen to the sound and find the desired play

start position.

SCAN

RVS FWD

SCAN

Shockproof memory

•A maximum of approximately 20 seconds

uncompressed audio data is stored into memory

(per drive). This guards audible interruptions due

to external mechanical shocks such as bumps

or other hard vibrations.

• If advanced data reading is not possible due to

scratches or dirt on the disc, playback stops

once the data stored up to that point is read.

RVS FWD

NOTE:

• For MP3 discs, frames are not displayed,

however frame resolution is audible by turning

the jog wheel (inner side) y.

(2) BRAKE

• Use this function to achieve effect similar to analog players.

Push the BRAKE button i to light

the BRAKE LED.

• The effect sound is similar to

a DJ turntable coming to a

quick stop. This effect can

be achieved by pushing the

PLAY/PAUSE button !1

during playback.

RVS FWD

During pause, turn the shufe ring.

If turned in the FWD direction, the pause point is moved to the forward direction, and pause mode is set

at the new point.

IfturnedintheRVSdirection,thepausepointismovedtothereversedirection,andpausemodeisset

at the new point.

During pause, turn the jog wheel (inner side).

If turned in the FWD direction, the pause point is moved to the forward direction frame by frame, and

pause mode is set at the new point.

IfturnedintheRVSdirection,thepausepointismovedtothereversedirectionframebyframe,and

pause mode is set at the new point.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Comments to this Manuals

No comments

Denon DN-D4500MK2 Owner's Manual Page 24

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-D4500MK2