Denon AVR-887 User Manual download pdf (Page 21)

ENGLISH

Connecting Other Sources Connecting Other Sources

Connecting a CD player

To connect the digital audio output from the CD player, you can choose from either the coaxial or optical

connections. If you choose to use the optical connection, it needs to be assigned. For more information

about Digital Input Assignment ( page 49).

AUDIO OUT

CD player

COAXIAL

OUT

NOTE:

• If humming or other noise is generated when the ground wire is connected to the SIGNAL GND

terminal, disconnect the ground wire.

Connecting a turntable

• The phono input can accept signals from moving magnet (MM) and high output moving coil (MC) phono

cartridges. If your turntable is equipped with a low output MC cartridge, you will need to use a separate

MC head amplifier or step-up MC transformer.

AUDIO OUT

GND

Turntable

(MM cartridge)

Connecting the external inputs (EXT. IN) terminals

• These terminals are for inputting multi-channel audio signals from an outboard decoder, or a component

with a different type of multi-channel decoder, such as a DVD-Audio player, or a multi-channel Super

Audio CD player, or other future multi-channel sound format decoder.

• The video signal connection is the same as that for a DVD player ( page 9).

• For instructions on playback using the external input (EXT. IN) terminals ( page 25).

•With discs on which special copyright protection measures have been taken, however, the digital signals

may not be output from the DVD player. In this case, connect the DVD player’s analog multi-channel

output to the AVR-887’s EXT. IN terminals for playback. Also refer to your DVD player’s operating

instructions.

DVD Audio-Video /

Super Audio CD player /

External decoder

FRONT

7.1ch AUDIO OUT

CENTER

SURROUND

BACK

SUB-

WOOFER

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 81 82

No comments

Denon AVR-887 User Manual Page 21