Denon DN-F20R Operations Instructions download pdf (Page 14)

ENGLISH

Card slot cover

Press the upper left corner of the cover (marked “PUSH”) to

open it.

LCD display

CARD button

Use this to select the current card.

LIGHT button

Use this to turn the LCD’s back light on (or off).

DC IN terminal

This is the DC input terminal for using the included AC adaptor.

Only use the included AC adaptor. Using other

adaptors may result in fire or electric shock.

PARALLEL REMOTE input terminal

Use this input terminal to connect external control signals.

PHONES output terminal

When headphones are plugged in, the set’s monitor speaker

turns off.

MONITOR VOL. control

Use this to adjust the volume of the monitor speaker and

headphones.

POWER ON/OFF switch

Use this switch to turn on the set’s power.

REC LEVEL control

Use this to adjust the recording level.

The outer control is for the left channel, the inner control for the

right channel.

Cautions on using the POWER OFF/ON switch

• “HELLO” appears on the display window after the power is

turned on. The set is being initialized while this is displayed.

Doing not load or eject cards or perform any operations at this

time.

• When the set’s power is turned off, final processing is

performed on the card. Do not eject cards, disconnect the AC

adaptor or remove the batteries at this time. If the final

processing is not performed, the data will not be properly

written on the card and the card may be damaged.

• Even when the power switch is OFF, a very small current will

flow inside the unit.

When the unit will not be in use for a long period, be sure to

remove the batteries and disconnect the AC cord from the

outlet.

Front side

Left side

Right side

MIC input connector

These are XLR type connectors for microphone signal input.

Pin layout: 1 – Ground (G)

2 – Hot (H)

3 – Cold (C)

Use less than 600Ω/ohms impedance microphone.

LINE IN terminals

These are input terminals for connecting line signals.

LINE OUT terminals

These are output terminals for connecting line signals.

Turn the power switch “OFF” state before

connecting or disconnecting the each terminal.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 33 34

Comments to this Manuals

No comments

Denon DN-F20R Operations Instructions Page 14

Comments to this Manuals

Related products and manuals for Recording Equipment Denon DN-F20R