Denon AVR-1912 Owner's Manual download pdf (Page 16)

The acoustic characteristics of the connected speakers and

listening room are measured and the optimum settings are made

automatically. This is called “Audyssey

Auto Setup”.

To perform measurement, place the setup microphone in

multiple locations all around the listening area. For best results,

we recommend you measure in six or more positions, as shown

in the illustration (up to eight positions).

•When performing Audyssey

Auto Setup, Audyssey MultEQ

XT/

Audyssey Dynamic EQ

/Audyssey Dynamic Volume

functions

become active (vpage78, 79).

•To set up the speakers manually, use “Speaker Setup”

(vpage83) on the menu.

NOTE

•Make the room as quiet as possible. Background noise can disrupt

the room measurements. Close windows, silence cell phones,

televisions, radios, air conditioners, ﬂuorescent lights, home

appliances, light dimmers, or other devices as measurements may

be affected by these sounds.

•Cell phones should be placed away from all audio electronics during

the measurement process as Radio Frequency Interference (RFI)

may cause measurement disruptions (even if the cell phone is not

in use).

•Do not unplug the setup microphone from the main unit until

Audyssey

Auto Setup is completed.

•Do not stand between the speakers and setup microphone or allow

obstacles in the path while the measurements are being made. This

will cause inaccurate readings.

•Loud test sounds may be played during Audyssey

Auto setup. This

is part of normal operation. If there is background noise in room,

these test signals will increase in volume.

•Operating

M df during the measurements

will cancel the measurements.

•Measurement cannot be performed when

headphones are connected.

Settings

Here, we explain “Audyssey

Auto Setup”, which allows you to

automatically make the optimal settings for your speakers, and

“Network Setup”, which allows you to connect this unit to a home

network (LAN).

This unit lets you play via your home network (LAN) music ﬁles stored

on a computer and music content such as that from Internet radio.

Selecting a listening mode (Surround mode)

(vpage44)

Playback (Basic operation) (vpage20)

n Set up speakers (Audyssey

Auto Setup)

(vpage13)

n Making the network settings (Network Setup)

(vpage19)

Playback (Advanced operation) (vpage58)

Set up speakers (Audyssey

Auto Setup)

About setup microphone placement

•Measurements are performed by placing the setup microphone

successively at multiple positions throughout the entire listening

area, as shown in GExample qH. For best results, we recommend

you measure in six or more positions, as shown in the illustration

(up to eight positions).

•Even if the listening environment is small as shown in GExample wH,

measuring at multiple points throughout the listening environment

results in more effective correction.

FL SW C FR

SBL SBR

FL SW C FR

SBL SBR

(

: Measuring positions)

GExample qH GExample wH

(

: Measuring positions)

FL Front speaker (L) SL Surround speaker (L)

FR Front speaker (R) SR Surround speaker (R)

C Center speaker SBL Surround back speaker (L)

SW Subwoofer SBR Surround back speaker (R)

About the main listening position (*M)

The main listening position is the position where listeners would

normally sit or where one would normally sit alone within the listening

environment. Before starting Audyssey

Auto Setup, place the setup

microphone in the main listening position. Audyssey MultEQ

XT uses

the measurements from this position to calculate speaker distance,

level, polarity, and the optimum crossover value for the subwoofer.

Basic version

Advanced version

Information

Basic version

vSee overleaf

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 133 134

Comments to this Manuals

No comments

Denon AVR-1912 Owner's Manual Page 16

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-1912