Denon AVR-1912 Owner's Manual download pdf (Page 87)

System Setup

Setting items Setting details

Speaker Conﬁg.

(Continued)

F.Height : Set the presence and size of the front height speakers.

•Large : Use a large speaker that can adequately play back low

frequencies.

•Small : Use a small speaker that has inadequate playback capacity for

low frequencies.

•None : Select when the front height speakers are not connected.

NOTE

When “Amp Assign” setting (vpage 83) is “F.HEIGHT”, you can

make the “F.Height” setting.

Bass Setting

Set subwoofer and LFE

signal range playback.

Subwoofer Mode : Select low range signals to be reproduced by

subwoofer.

•LFE : The low range signal of the channel set to “Small” speaker size is

added to the LFE signal output from the subwoofer.

•LFE+Main : The low range signal of all channels is added to the LFE

signal output from the subwoofer.

•“Subwoofer Mode” can be set when “Speaker Conﬁg.” – “Subwoofer”

(vpage83) is set to “Yes”.

•Play music or a movie source and select the mode offering the strongest

bass.

•Select “LFE+Main” if you want the bass signals to always be produced

from the subwoofer.

NOTE

If “Front” and “Center” for “Speaker Conﬁg.” are set to “Large”, and

“Subwoofer Mode” is set to “LFE”, no sound may be output from the

subwoofers, depending on the input signal or selected surround mode.

LPF for LFE : Set LFE signal playback range. Set this when you want to

change the playback frequency of the subwoofer.

•80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz

Setting items Setting details

Distance

Set distance from listening

position to speakers.

Measure beforehand the

distance from the listening

position to each speaker.

Unit : Set the unit of distance.

•Meters / Feet

Step : Set the minimum variable width of the distance.

•0.1m / 0.01m

•1ft / 0.1ft

Default : The “Distance” settings are returned to the default settings.

•Yes : Reset to the defaults.

•No : Do not reset to the defaults.

When you select “Default” and press ENTER,

the “Return settings to the default?” prompt

is displayed. Select either “Yes” or “No”, and

press ENTER.

Front L / Front R / Center / Subwoofer / Surround L / Surround R /

S.Back L

/ S.Back R

/ F.Height L / F.Height R : Select the speaker.

z When the “Speaker Conﬁg.” – “S.Back” setting (vpage83) is set

to “1spkr”, “S.Back” is displayed.

•0.00m – 18.00m / 0.0ft – 60.0ft : Set the distance.

•The speakers that can be selected differ depending on the “Amp Assign”

(vpage83) and “Speaker Conﬁg.” (vpage83) settings.

•Default settings :

Front L / Front R / Center / Subwoofer / F.Height L / F.Height R : 3.60 m

(12.0 ft)

Surround L / Surround R / S.Back L / S.Back R : 3.00 m (10.0 ft)

•Set the difference in the distance between the speakers to less than

6.00 m (20.0 ft).

NOTE

Speakers set to “None” in “Speaker Conﬁg.” (vpage 83) are not

displayed.

Basic version

Advanced version

Information

Advanced version

vSee overleaf

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 133 134

Comments to this Manuals

No comments

Denon AVR-1912 Owner's Manual Page 87

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-1912