Denon AVR 3806 - AV Receiver Operations Instructions download pdf (Page 35)

Basic Operation Basic Operation

• DOLBY DIGITAL

• DTS

• PCM

Depending on the input signal.

• The “HDCD” indicator lights when digital

signals are being input with a player that

supports HDCD playback.

Depending on the input signal.

• The “DSD” indicator lights when the

DENON LINK have been connected and

the DSD signals have been inputted (

page 20).

Flat:

This the frequency response of all speakers flat.

This is suitable for multi-channel music reproduction, from

discrete music sources such as Dolby Digital 5.1, DTS, DVD-

Audio and Super Audio CD.

Audyssey:

This adjusts the frequency response of all speakers to correct

the effects of room acoustics.

Front:

This adjusts the characteristics of each speaker to the

characteristics of the front speakers.

Manual:

Selects the setting value that was set in the Manual EQ Setup.

For details of the “Setting the Manual EQ Setup” ( page 70,

71).

2 Input signal display

The “DIG.” indicator lights when digital signals are being

input properly. If the “DIG.” indicator does not light, check

whether the digital input component setup ( page 63) and

connections are correct and whether the component’s power

is turned on.

AL24 processing is activated when PCM signals are played

while the surround mode is set to PURE DIRECT, DIRECT,

STEREO, MULTI CH PURE DIRECT, MULTI CH DIRECT or

MULTI CH IN.

NOTE:

• The “DIG.” indicator will light when playing CD-ROMs

containing data other than audio signals, but no sound will

be heard.

Room EQ function

The AVR-3806’s Auto Setup / Room EQ function offers three

correction curves: “Audyssey”, “Front”, “Flat”. The timbre of

the speakers can also be adjusted manually using a graphic

equalizer.

Details of the different correction curves are described below.

OFF Audyssey Front Flat Manual

Press the ROOM EQ button.

• The “Audyssey” is selected, the MultEQ XT indicator lights

green.

• The “Front” or “Flat” is selected, the MultEQ XT indicator

lights red.

The Room EQ switches as follows each time the ROOM EQ

button is pressed.

The MultEQ XT indicator also lights red if the “Speaker

Configuration”, “Distance”, “Channel Level” or “Crossover

Frequency” is set manually after conducting the Auto Setup

procedure.

• The “Audyssey”, “Front” and “Flat” Room EQ curves can be

selected after performing the Auto Setup procedure.

2 Input mode display

• In the AUTO mode

• In the DIGITAL PCM mode

• In the DIGITAL DTS mode

• In the ANALOG mode

Depending on the input signal.

• In the EXT.IN mode

Press the ANALOG button on the main unit or INPUT

MODE

button on the remote control unit to switch to

the analog input.

2 Selecting the analog mode

ANALOG (exclusive analog audio signal playback mode):

The signals input to the analog input terminals are decoded

and played.

NOTE:

• Input mode when playing DTS sources:

Noise will be output if DTS-compatible CDs or LDs are

played in the “ANALOG” or “PCM” mode.

When playing DTS-compatible sources, be sure to connect

the source component to the digital input terminals

(OPTICAL/COAXIAL) and set the input mode to “DTS”.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 141 142

Comments to this Manuals

No comments

Denon AVR 3806 - AV Receiver Operations Instructions Page 35

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR 3806 - AV Receiver