Denon AVR 3806 - AV Receiver Operations Instructions download pdf (Page 47)

Basic Operation Basic Operation

Press the CURSOR

button to set the level.

To increase the bass or treble:

The bass or treble sound can be increased up to +6 dB in

steps of 1 dB.

To decrease the bass or treble:

The bass or treble sound can be decreased down to –6 dB

in steps of 1 dB.

Press the ENTER button.

• The surround parameter menu screen reappears.

Press the ENTER or SURROUND PARAMETER

button to complete the setting.

Press the CURSOR

button to select the “Tone

Defeat OFF”.

Press the CURSOR

button to select the

“Bass” or “Treble”.

2 Tone defeat mode

If you do not want the bass and treble to be adjusted, turn on the

tone defeat mode.

Press the TONE DEFEAT button to turn on the “Tone

Defeat” mode.

The signals do not pass through the bass and treble

adjustment circuits, providing higher quality sound.

Channel level

You can adjust the channel level either according to the playback

sources or to suit your tastes, as described below.

Press the ENTER button.

• The “Channel Vol.” screen is displayed.

Channels which is not used are not displayed.

Press the CURSOR

or ENTER button to

select the speaker.

The channel switches as shown below each time the ENTER

button is pressed.

Press the CURSOR

button to adjust the

level.

The adjustment range for the different channels is +12 dB

to –12 dB in step of 0.5 dB.

The sound from the subwoofer can be completely cut by

lowering the SW (subwoofer) setting one additional from

–12 dB (setting it to “OFF”).

FADER

SBL

SBR

Fader function

This function makes it possible to lower the volume of the front

channels (FL, C and FR) or the rear channels (SL, SR, SBL and

SBR) together. Use it for example to adjust the balance of the

sound from each position when multi-channel music sources are

played.

Press the ENTER button.

• The “Channel Vol.” screen is displayed.

Press the CURSOR

or ENTER button, then

select “Fader”.

The channel switches in the order shown below each time

the ENTER button is pressed.

FADER

SBL

SBR

• When the surround back speaker setting is set to “1spkr” for

“Speaker Configuration” ( page 75), this is set to “SB”.

• The channel whose channel level is adjusted lowest can be

faded to –12 dB using the fader function.

• If the channel levels are adjusted separately after adjusting the

fader, the fader adjustment values are cleared, so adjust the

fader again.

Press the CURSOR

button to reduce the

volume of the front channels, the CURSOR

button to reduce the volume of the rear channels.

Example: When “FRONT” is selected

The fader function does not affect the subwoofer channel

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 141 142

Comments to this Manuals

No comments

Denon AVR 3806 - AV Receiver Operations Instructions Page 47

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR 3806 - AV Receiver