Denon AVR 3806 - AV Receiver Operations Instructions download pdf (Page 77)

Advanced Setup – Part 1 Advanced Setup – Part 1

Setting the Power Amplifier Assignment

If no Surround back speakers are used in the main room, their

amplifier channels can be assigned for multi–zone use or the

front speaker‘s bi-amp connection.

Press the CURSOR

button to select the

“Power Amp Assign” at the “Option Setup”

menu, then press the ENTER button.

•The “Power Amp Assign” screen appears.

Press the CURSOR

button to select which

channel to assign the surround back power

amplifier to.

S. Back:

The Surround back speakers are used in MAIN ZONE.

Front:

This provides a bi-amp mode for the two main front

speakers, replicating the front left and front right

amplifier channel’s outputs.

Front B:

Both surround back power amplifier channels can be

used to provide a second set of stereo outputs that

match the front left and right speakers, providing a

Speaker B option for stereo sound in another location

( page 69).

ZONE2:

This mode assigns the surround back amplifier channels

to provide ZONE2 speaker-level outputs from the

surround back speaker terminals.

ZONE3:

This mode assigns the surround back amplifier channels

to provide ZONE3 speaker-level outputs from the

surround back speaker terminals.

Press the ENTER button to enter the setting.

• The “Option Setup” menu reappears.

Setting the Volume Control

Set the upper limit for the volume, the volume level when the

power is turned on, and the volume level when the mute mode

is set for the different zones.

Press the CURSOR

button to select the

“Volume Control” at the “Option Setup” menu,

then press the ENTER button.

• The “Volume Control” screen appears.

Press the CURSOR

button to select the

desired setting, then press the CURSOR

button to select the parameter.

Volume Limit:

Set the upper limit for the volume for the different zones.

• –20 dB, –10 dB, 0 dB:

The volume cannot be increased above the selected

levels.

• OFF:

If you do not want to set a volume limit, select “OFF”.

In this case, the volume can be set to the AVR-3806’s

maximum volume (output) level of +18 dB, which is

extremely loud.

Power On Level:

Set the volume that is set when the power is turned on

for the different zones.

You can adjust the MAIN ZONE volume level within the

range of –80 to +18 dB in steps of 1.0 dB and the ZONE2

(or ZONE3) volume level within the range of –70 dB to

+18 dB in steps of 1.0 dB.

• – – – (Mute)

The volume is always muted when the power is turned

on.

• LAST

The volume set when the AVR-3806 was last used is

stored in the memory and set when the power is turned

on.

Front Bi-Amp connections

Certain loudspeakers are equipped with two sets of input

terminals, for bi-amplification. The AVR-3806 Amp Assign

mode allows you to power bi-amp-capable speakers with

two amplifier channels. Be sure to consult the owner’s

manual of your bi-amp-capable speakers for further

information before proceeding.

AVR-3806

SPEAKER

NOTE:

• When making bi-amp connections, be sure to remove

the short-circuiting bar included with the speaker.

Option Setup

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 141 142

Comments to this Manuals

No comments

Denon AVR 3806 - AV Receiver Operations Instructions Page 77

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR 3806 - AV Receiver