Denon AVR 3806 - AV Receiver Operations Instructions download pdf (Page 40)

Basic Operation Basic Operation

TONE:

This adjusts the tone control ( page 41).

This can be set individually for the separate surround mode

other than PURE DIRECT and DIRECT mode.

2 Surround parameters q

CINEMA EQ. (Cinema Equalizer):

The Cinema EQ function gently decreases the level of the

extreme high frequencies, compensating for overly-bright

sounding motion picture soundtracks. Select this function if the

sound from the front speakers is too bright.

This function only works in the Dolby Pro LogicIIx, Dolby Pro

Logic, Dolby Digital, DTS Surround, DTS NEO:6 and WIDE

SCREEN modes.

D.COMP. (Dynamic Range Compression):

Motion picture soundtracks have tremendous dynamic range

(the contrast between very soft and very loud sounds). For

listening late at night, or whenever the maximum sound level is

lower than usual, the Dynamic Range Compression allows you

to hear all of the sounds in the soundtrack (but with reduced

dynamic range). (This only works when playing program

sources recorded in Dolby Digital or DTS.) Select one of the

four parameters (“OFF”, “LOW”, “MID” (middle) or “HI”

(high)). Set to OFF for normal listening.

This parameter is displayed only when playing compatible

sources in DTS mode.

LFE (Low Frequency Effect):

This sets the level of the LFE (Low Frequency Effect) sounds

included in the source when playing program sources recorded

in Dolby Digital, DTS, DVD-audio or Super Audio CD.

Program source and adjustment range:

–10 dB to 0 dB

When DTS encoded movie software is played, it is

recommended that the LFE LEVEL be set to 0 dB for

correct DTS playback.

When DTS encoded music software is played, it is

recommended that the LFE LEVEL be set to –10 dB for

correct DTS playback.

MODE/SB CH OUT:

Select the surround back channel playback method or mode.

(1) Multi channel source

• NON MTRX:

The same signals as those of the surround channels are

output from the surround back channels.

• MTRX ON:

The surround channel signals undergo digital matrix

processing and are output from the surround back channels.

• SB OFF (OFF):

No signal is played from the surround back channels.

• ES MTRX:

When playing DTS signals, the surround back signals undergo

digital matrix processing for playback.

• ES DSCRT:

When a signal identifying the source as a discrete 6.1-channel

source is included in the DTS signals, the surround back

signals included in the source are played.

• PLIIx Cinema:

Processing is performed with the Cinema mode of the PLIIx

decoder and the Surround Back channel is reproduced.

• PLIIx Music:

Processing is performed with the Music mode of the PLIIx

decoder and the Surround Back channel is reproduced.

(2) 2ch source

• OFF:

Playback is conducted without using the surround back

speaker.

• ON:

Playback is conducted using the surround back speaker.

This operation can be performed directly pressing the

SURROUND BACK button.

AFDM (Auto Flag Detect Mode):

• ON:

This function only works with software on which a special

identification signal is recorded. This software is scheduled to

go on sale in the future.

This is a function for automatically playing in the 6.1-channel

mode using the surround back speaker(s) if the software is

recorded in Dolby Digital EX or DTS-ES or in the normal 5.1-

channel mode without using the surround back speaker(s)

when the software is not recorded in Dolby Digital EX or DTS-

ES.

When AFDM is set to “ON” and the EX/ES flag is detected

automatically, the surround mode is fixed according to the

playing program source.

In this case, the “MODE/SB CH OUT” parameter can not be

selected on the surround parameter screen.

• OFF:

When the identification signal is detected automatically and

you would like to select the surround mode freely, set AFDM

to “OFF”.

In this case the “MODE/SB CH OUT” parameter can be

selected on the surround parameter screen regardless of the

playing program source.

Example:When playing software that has a Dolby Digital EX flag

q When AFDM is set to “ON”, the surround mode is

automatically set to the “DOLBY DIGITAL + PL

IIx CINEMA”

mode. The surround parameter screen will be displayed.

w When you would like to play back with the “Dolby Digital EX”

mode, set AFDM to “OFF” and select “MTRX ON” with “SB

CH OUT”.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 141 142

Comments to this Manuals

No comments

Denon AVR 3806 - AV Receiver Operations Instructions Page 40

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR 3806 - AV Receiver