Denon AVR-5805CI User Manual download pdf (Page 112)

112

Advanced Setup – Part 1

Setting the Component In Assignment

• This assigns the component (color difference) video input

terminals for the different input sources.

Press the CURSOR

button to select

“Component In Assign” at the “Video Setup”

menu, then press the

ENTER button.

• The “Component In Assign” screen appears.

Press the CURSOR

button to select the

input source, then press the

CURSOR

button to select the component video input

terminal.

Select from among 1-RCA to 5-RCA and 6-BNC.

If the same component video input terminal is

selected, the setting for the input source that was

previously assigned switches to “NONE”.

When “Default Yes” is selected, then press the

CURSOR

button to reset to the default values.

Press the ENTER button to enter the setting.

• The “Video Setup” menu reappears.

Press the CURSOR

button to select the

input source, then press the

CURSOR

button to select “ON” or “OFF”.

ON:

When there are multiple input signals, the input

signals are detected and the input signal to be

output from the video monitor output terminal is

selected automatically in the following order:

component video, S-Video, composite video.

Setting the Video Convert Mode

• This sets whether or not to use the video conversion

function.

Press the CURSOR

button to select

“Video Convert Mode” at the “Video Setup”

menu, then press the

ENTER button.

• The “Video Convert Mode” screen appears.

• Audio signals input from the analog and digital terminals are

not output to the TV.

•With HDMI, the video and audio signals are transferred

simultaneously. When HDMI is assigned to an input source,

the digital audio input assignment switches to HDMI along

with the video input.

When this setting is made for input sources to which a digital

audio input (DENON LINK, IEEE1394 etc.) is previously

assigned, the digital audio assignment is set to HDMI.

In this case, reassign the digital input using the procedure

described at “Digital In Assign” ( page 104) and

“IEEE1394 Assign” ( page 107).

OFF:

The convert function does not operate.

In such cases, the input device’s cable type must

be the same as the type of cable connected to the

AVR-5805CI’s monitor output terminal (video, S-

Video or component video).

Press the ENTER button to enter the setting.

• The “Video Setup” menu reappears.

• Down-converting from the component video signal to the S-

Video and composite video signal is possible only when the

resolution of a component video signal is 480i / 576i.

• When a non-standard video signal from a game machine or

some other source is input, the video conversion function

might not operate. If this happens, please set the conversion

mode to “OFF”.

•When the video conversion function has been used,

information such as that of text broadcasts which has been

added to the video signal might not be output. If this

happens, please set the conversion mode to “OFF”.

Press the ENTER button to enter the setting.

• The “Video Setup” menu reappears.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 213 214

Comments to this Manuals

No comments

Denon AVR-5805CI User Manual Page 112

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-5805CI