Denon AVR-5805CI User Manual download pdf (Page 45)

Basic Operation

Connect the headphone to the PHONES jack.

• The pre-out output (including the speaker output) is

automatically turned off when headphones are

connected.

NOTE:

•To prevent hearing loss, be careful not to raise the volume

level excessively when using headphones.

Listening over headphones

Press the MUTE button.

You can adjust the muting level ( page 134).

Turning the sound off temporarily

(MUTING)

• Use this to mute the audio output temporarily.

• Cancelling MUTING mode:

Press the MUTE button again, or press the MASTER VOLUME

button on the remote control, or adjust the volume up or

down via the front panel MASTER VOLUME knob.

Switching the surround speakers

Press the SPEAKER button.

The surround speakers switch as shown below each

time the SPEAKER button is pressed.

SURROUND A

SURROUND A+B

SURROUND B

This operation is possible when the setting for using

both surround speakers A and B is made at “Speaker

Configuration” ( page 140, 141).

Through

480p/576p 1080i 720p

• When “Component” is selected for the “Scaler” setting:

Press the SCALE button.

The resolution switches as follws each time the SCALE

button is pressed.

• When “HDMI” is selected for the “Scaler” setting:

Selection of resolution setting (SCALE)

1080pThrough

480p/576p 1080i 720p

When the SCALE button is pressed, the current setting is

shown on the display. If the SCALE button is pressed

while the current setting is displayed, the “Resolution”

setting can be changed.

For description of the each resolution settings, see page

113 to 114.

The monitor out terminal switch as shown below

each time the

MONITOR SELECT button is pressed.

Switching between HDMI and DVI-D

monitor output

DVIHDMI

Video on/off

Press the VIDEO ON/OFF button.

• When no video signals of a DVD, etc., are connected to the

AVR-5805CI and the DVD, etc., are connected directly to a

TV, etc., the unneeded video circuitry can be turned off by

selecting the “VIDEO OFF” setting.

Press the VIDEO SELECT button until the desired

image appears.

Combining the currently playing sound

with the desired image (VIDEO SELECT)

• Cancelling simulcast playback:

Select the “SOURCE” pressing the VIDEO SELECT button.

• It is not possible to select HDMI and DVI input signals.

• When playing HDMI/DVI video input signals, the analog

video signal of another function cannot be selected for the

HDMI video output.

• If the VIDEO SELECT mode is used during playback in the

XM or Network Audio, the picture switches to the picture

selected from the control panel display.

Cancel the VIDEO SELECT mode if you want to display the

control panel.

The video source selected with the video select function

is stored in the memory for the different input sources.

VIDEO SOURCE

DVD

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 213 214

Comments to this Manuals

No comments

Denon AVR-5805CI User Manual Page 45

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-5805CI