Denon AVR-5805CI User Manual download pdf (Page 40)

Connecting Other Sources

Connecting the CONTROL terminal

This terminal is used for an external

controller.

Perform the following operation before using

an external controller connected to the RS-

232C terminal:

1. Press the ON/STANDBY button on the

main unit and set the unit to the

operating mode.

2. Perform the operation to turn off the

power from the external control.

3. Check that the product has been set to

the standby mode.

After checking the above, check the

connections of the external controller.

Operation is possible.

Connecting the XM terminal

•AVR-5805CI is the XM Ready

receiver. You can receive XM

Satellite Radio by connecting to the XM Mini-Tuner and Home

Dock (includes home antenna, sold separately) and subscribing to the XM service.

•Plug the XM Mini-Tuner Home Dock into XM terminal on the rear panel.

• Position the Home Dock antenna near a south-facing window to receive the best signal.

For details, see “XM Satellite Radio” ( page 71).

When making connections, also refer to the operating instructions of the XM Mini-Tuner and Home Dock.

XM Mini-Tuner and Home Dock

NOTE:

• Keep the power supply cord unplugged until the XM Mini-Tuner and Home Dock connection has been completed.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 213 214

No comments

Denon AVR-5805CI User Manual Page 40