Denon MULTEQXT AVR-4306 Operations Instructions download pdf (Page 82)

Advanced Setup – Part 1 Advanced Setup – Part 1

Setting the Volume Control

Set the upper limit for the volume, the volume level when the

power is turned on, and the volume level when the mute mode

is set for the different zones.

Press the CURSOR

button to select

“Volume Control” at the “Option Setup” menu,

then press the ENTER button.

• The “Volume Control” screen appears.

Press the CURSOR

button to select the

desired setting, then press the CURSOR

button to select the parameter.

Volume Limit:

Set the upper limit for the volume for the different zones.

• –20 dB, –10 dB, 0 dB:

The volume cannot be increased above the selected levels.

• OFF:

If you do not want to set a volume limit, select “OFF”.

In this case, the volume can be set to the AVR-4306’s

maximum volume (output) level of +18 dB, which is

extremely loud.

Mute Level:

Set the volume attenuation level when the mute mode is set

for the different zones.

• FULL

The volume is fully muted.

• –40 dB

The volume is lowered 40 dB from the current level.

• –20 dB

The volume is lowered 20 dB from the current level.

Volume Level:

Set whether to fix the output level for the different zones or

make it variable.

• Variable

The level can be adjusted freely using buttons on the remote

control unit.

• –40 dB, 0 dB

The output level is fixed at the set level and the volume can

no longer be adjusted.

Press the ENTER button to enter the setting.

• The “Option Setup” menu reappears.

• For ZONE2 and ZONE3, the “Volume Limit” and “Power On

Level” can be set when “Variable” is selected for “Volume

Level”.

• When the power amplifier is assigned to either of the ZONE2

and ZONE3 channels at “Power Amp Assign”, “–VAR–” (only

variable) is displayed and the fixed level cannot be set.

Setting the Trigger Out

Press the CURSOR

button to select

“Trigger Out” at the “Option Setup” menu, then

press the ENTER button.

• The “Trigger Out” screen appears.

Press the CURSOR

button to select the

zone (MAIN ZONE, ZONE2 and ZONE3).

The power supplied from the trigger out terminal turns on

and off when the power for the set zone is turned on and

off.

Press the CURSOR

button to select the

trigger out terminal you want to set, then press

the ENTER button.

• The setting screen appears.

Example: When “Trigger Out 1” is selected

•Two 12 V DC Trigger Outputs on the rear panel can be used to

control other devices with compatible trigger inputs, such as

motorized screens, motorized screen masking, motorized

drapes, and other trigger-controlled devices.

• Set the DC output supplied from the trigger out terminals for

the various input sources to “ON” or “OFF”.

Power On Level:

Set the volume that is set when the power is turned on for

the different zones.

You can adjust the MAIN ZONE volume level within the range

of –80 dB to +18 dB and ZONE2 (or ZONE3) volume level

within the range of –70 dB to +18 dB in steps of 1.0 dB.

• – – – (Mute)

The volume is always muted when the power is turned on.

• LAST

The volume set when the AVR-4306 was last used is stored

in the memory and set when the power is turned on.

“Aux1” is setting of “AUX/Net”, and “Aux2” is setting of

“AUX/iPod”.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 145 146

Comments to this Manuals

No comments

Denon MULTEQXT AVR-4306 Operations Instructions Page 82

Comments to this Manuals

Related products and manuals for AV receivers Denon MULTEQXT AVR-4306