Denon AVR-786 User Manual download pdf (Page 39)

ENGLISH

Advanced Operation Advanced Operation

Remote control unit operations during

multi-source playback (selecting the source)

Set the MODE 1 switch to the “AUDIO”.

Set the MODE 2 switch to the “ZONE2”.

Press the ZONE2 ON button.

To cancel the ZONE2 mode:

Press the ZONE2 OFF button.

Press the FUNCTION button.

The ZONE2 source switches directly.

The output level of the ZONE2 SPEAKER OUT

terminals can be controlled pressing the

VOLUME button on the remote control unit.

Default setting (ZONE2 VOLUME LEVEL):

– – – dB (MINIMUM)

When the ZONE2 SOURCE function is set to

TUNER, the preset channel can be selected

using the CHANNEL button on the remote

control unit.

This is only possible when the main unit in the ZONE2 mode

( page 43).

Outputting a program source to amplifier,

etc., in a different room (ZONE2 mode)

Press the ZONE2/REC SELECT button to display

the “ZONE2 SOURCE” on the display.

The display switches as follows each time the button is

pressed.

Turn the FUNCTION knob to select the source

you want to output appears on the display.

Start playing the source to be output.

For operating instructions, refer to the manuals of the

respective components.

To cancel, turn the FUNCTION knob and select “SOURCE”.

RECZONE2

Press the ZONE2 button.

Lights

• The signals of the source selected in the ZONE2 mode are also

output from the VCR and CDR/TAPE recording output terminals.

• Digital signals are not output to the ZONE2 output terminals.

ZONE2

FUNCTION ZONE2/REC SELECT

MODE 2

MODE 1

ZONE2 ON

ZONE2 OFF

FUNCTION

VOLUME

CHANNEL

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 67 68

Comments to this Manuals

No comments

Denon AVR-786 User Manual Page 39

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Denon AVR-786