Denon AVR-786 User Manual download pdf (Page 40)

ENGLISH

Advanced Operation Advanced Operation

Other functions

Playing one source while recording another

(REC OUT mode)

Press the ZONE2/REC SELECT button to display

the “RECOUT SOURCE” on the display.

The display switches as follows each time the button is

pressed.

Turn the FUNCTION knob to select the source

you want to output appears on the display.

Set the recording mode.

For operating instructions, refer to the manual of the

component on which you want to record.

To cancel, turn the FUNCTION knob and select “SOURCE”.

RECZONE2

• Recording sources other than digital inputs selected in the REC

OUT mode are also output to the ZONE2 audio output

terminals.

• Digital signals are not output to the REC SOURCE or audio

output terminals.

• The DIGITAL IN’s signal selected with the FUNCTION knob is

output to the DIGITAL OUT (OPTICAL) terminal.

Last function memory

• This unit is equipped with a last function memory which stores

the input and output setting conditions as they were

immediately before the power is switched off.

This function eliminates the need to perform complicated

resettings when the power is switched on.

• The unit is also equipped with a back-up memory. This function

provides approximately one week of memory storage when the

main unit’s POWER switch is off and the power supply cord

disconnected.

Initialization of the microprocessor

If the indication on the display is not normal or if the operation of

the unit is not correct, then the microprocessor should be reset

by the following procedure.

Switch off the unit using the main unit’s

POWER switch.

Keep both SPEAKER A and B buttons depressed

and turn on the unit by pressing the main unit’s

POWER switch.

Check that the entire display is flashing at 1-

second intervals and release the buttons.

• The microprocessor will be initialized.

• If step 3 does not work, start over from step 1.

• If the microprocessor has been reset, all the button settings are

reset to the default values (the values set upon shipment from

the factory).

POWER SPEAKER

FUNCTION ZONE2/REC SELECT

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 67 68

Comments to this Manuals

No comments

Denon AVR-786 User Manual Page 40

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Denon AVR-786