Denon S-301 User Manual download pdf (Page 19)

ENGLISH

Connecting Other Sources Connecting Other Sources

Connecting a DBS / Cable tuner / VCR

• When making connections, also refer to the operating instructions of the other components.

• If the device to be connected is equipped with a digital audio output (COAXIAL), connect it to the

DIGITAL Input (COAXIAL) on the ADV-S301.

DBS / Cable Tuner/

VCR

AUDIO OUT

COAXIAL

OUT

S VIDEO

OUT

VIDEO

OUT

Connecting a tape deck, MD recorder or CD recorder

• When making connections, also refer to the operating instructions of the other components.

• Connect the tape deck’s audio output and audio input terminals to the ADV-S301’s AUX3 using

pin-plug cords.

Tape deck /

MD recorder /

CD recorder

AUDIO OUT

AUDIO IN

OPTICAL

OUT

Monitor TV

S VIDEO

Connecting a S-Video connections (Better picture quality)

• When there are multiple input signals, the input signals are detected and the input signal to be

output from the video monitor output terminal is selected automatically in the following order: S-

Video, composite video.

• The S-301 is equipped with a function for up and down converting video signals.

• Cautions on the video conversion function:

There is no TBC (Time Base Collector) for AUX1 and AUX2 Video inputs.

When the component video terminals are used to connect the S-301 with a TV (or monitor,

projector, etc.) and the video or S-Video terminals are used to connect the S-301 with a VCR,

depending on the combination of the TV and VCR the picture may flicker in the horizontal

direction, be distorted, be out of sync or not display at all when playing video tapes.

If this happens, connect a commercially available video stabilizer, etc., with a TBC (time base

corrector) function between the S-301 and the VCR, or if your VCR has a TBC function, turn it on.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 147 148

No comments

Denon S-301 User Manual Page 19