Denon AVR-1906 User Manual download pdf (Page 31)

ENGLISH

Basic Operation Basic Operation

Channel Level

You can adjust the channel level either according to the playback

sources or to suit your taste, as described below.

Press the CH SELECT button to select the

speaker whose level you want to adjust.

The channel switches as shown below each time the button

is pressed.

FL C FR SR

SW SL

SBL SBR

When the surround back speaker setting is set to “1sp” for

“Speaker Configuration”, this is set to “SB”.

“SB” appears only when the “Power Amp Assign.” setting

is the surround back mode.

Press the CURSOR

button to adjust the

level of the selected speaker.

The default setting of the channel level is 0 dB.

The level of the selected speaker can be adjusted within the

range of +12 to –12 dB by pressing the CURSOR buttons.

The SW channel level can be turned off by decreasing it one

step from –12 dB.

OFF ´ –12 dB ´ +12 dB

Tone control setting

2 Adjusting the sound quality (tone)

The tone control function will not work in the DIRECT mode.

Press the TONE CONTROL button.

The tone switches as follows each time the TONE CONTROL

button is pressed.

TREBLEBASS

Turn the SELECT knob to adjust the level of the

bass or treble.

To increase the bass or treble:

Turn the control clockwise. (The bass or treble sound can be

increased up to +12 dB in steps of 2 dB.)

To decrease the bass or treble:

Turn the control counterclockwise. (The bass or treble sound

can be decreased down to –12 dB in steps of 2 dB.)

2 Tone defeat mode

If you do not want the bass and treble to be adjusted, turn on the

tone defeat mode.

Press the TONE DEFEAT button.

The signals do not pass through the bass and treble

adjustment circuits, thus resulting in higher quality sound.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 66 67

Comments to this Manuals

No comments

Denon AVR-1906 User Manual Page 31

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-1906