Denon AVR 3806 - AV Receiver Operations Instructions download pdf (Page 17)

Easy Setup and Operation Easy Setup and Operation

Speaker system measurement

Press the CURSOR

button to select the

“OK Start”, then press the CURSOR

button.

• Measurements for the first point start.

The screen shown at the below appears once the

measurements for the main listening position are

completed.

Check the results of the speaker detection, then

press the ENTER button.

• The second screen appears.

[ Second screen ]

If the check ends, press the ENTER button again.

NOTE:

• If the results are not as expected or if an error message is

displayed, select “Retry” and perform the measurements

again. (For details on the error messages ( page 13).

If the results of remeasurement are still not as expected or

if an error message is displayed, turn off the power switch

and check the speaker connections. Then start the

measurements again from the beginning.

• Measurement is cancelled when MASTER VOLUME is

operated while the Auto Setup is performed.

With these measurements, the “Speaker Configuration”,

“Distance”, “Channel Level”, “Crossover Frequency” and

“Room EQ” are analyzed automatically. The main listening

position is measured first, so leave the microphone where it is.

Perform step 2, 3 repeatedly.

After measuring at the number of points

according to your listening environment, press

the CURSOR

button to select the

“Calculate”, then press the CURSOR

button.

• The speaker system is analyzed.

The more measurement points, the better the resulting room

correction effect. We recommend 6 measurement points – 6

measurement points provides the best room correction effect.

Next the measurements for the second point will

be taken.

Press the CURSOR

button.

• Measurements for the second point start.

Place the microphone at the second listening position. For

instructions on the position in which the microphone should

be placed ( page 9).

The amount of time required for the analysis depends on the

number of speakers and the number of measuring points.

The greater the number of speakers and measuring points,

the longer the time required.

Measurements can be ended when there are 6 or less

measurement locations; however, to obtain better results,

measurements at 6 locations is recommended.

Once the calculations are completed, a screen for

confirming the results of the measurements appears.

Check of the measurement result

Press the CURSOR

button to select an

item, then press the ENTER button.

• The verification screen appears.

Example: Speaker Config. Check

Press the ENTER button.

• The second screen appears.

Example: Speaker Config. Check

The results of the measured items can be checked.

[ First screen ]

[ Second screen ]

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 141 142

Comments to this Manuals

No comments

Denon AVR 3806 - AV Receiver Operations Instructions Page 17

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR 3806 - AV Receiver