With the exception of the case in 121 below, only the signal connected to the analog input jacks are output from the REC OUT and multi-room
output jacks.
[I] Playing one source while recording another (REC OUT mode)
1
Press the REC/M-ZONE 2 button until
REC I
“RECOUT H=%lc*” appears on the set’s
M-ZONE 2
display.
9
(Main unltj
2
Select the source you want to record
FUNCTION
appears on the set’s display.
l The indicator for the selected
program source lights.
ml
1,2 I,4 2,4
(Man UnItI
3
Set the recording mode.
l For operating instructlons, refer to the manual of the
component on which you want to record.
4
To cancel, press the REC/M-ZONE 2 button twice. Then
select “M-ZONE2 SOURCE”.
REC ,
[2] Recording Dolby Digital and DTS multichannel sources
l With this set it is possible to record Dolby DigItal and DTS
multichannel signals converted into 2-channel analog signals.
l The recording signals are output to the MULTI ZONE-2 OUT,
TAPE and VCR output terminals.
l Down-mixed analog signals converted into digital signals are
output from the OPTICAL 5 and 6 digital output terminals at this
time.
1
Press the REC/M-ZONE 2 button until “RECOUT *H*”
appears on the display. Then select “RECOUT SOURCE”.
REC I
q (0,
(Man unit)
2
Set the input mode according to the
INPUT
source to be played.
MODE
q
Set the surround mode by pressing the DlRECT or STEREO
3
button.
l The multichannel digital signals are down-mixed and output
to the TAPE and VCR output terminals
NOTES:
l Recording sources other than digital inputs selected in the REC
OUT mode are also output to the multi source audio/video
output jacks.
l Digital signals are not output from the MULTI ZONE 1 audio
output lacks.
323
1 1
-3
-3
4
Set the recording mode.
42
Comments to this Manuals