Denon DN-A7100 - AV Surround Preamplifier User's Guide download pdf (Page 29)

ENGLISH

Example:

Monitor is connected with the component.

VIDEO

component

Monitor is connected with the video or S-video.

VIDEO

or S-VIDEO

Monitor is connected with the video or component.

S-VIDEO VIDEO

component

VIDEO

or S-VIDEO

component

The signal cannot be converted from the component

to the video or S-video.

Notes of OSD menu:

• The setup menu can be displayed through all video

out (COMPONENT, S-VIDEO, VIDEO).

• The setting informations (e.g. volume setting) are

displayed through all video out when the VIDEO

CONVERT function are set ON.

Note:

No setting information is displayed when the

signal is emitted from the COMPONENT IN to

COMPONENT OUT.

• The setting informations (e.g. volume setting) are

displayed through the S-VIDEO or VIDEO out

when the VIDEO CONVERT function are set

OFF. When the S-VIDEO and VIDEO outputs are

used simultaneously, the setting informations are

displayed through the S-VIDEO out only.

VIDEO CONVERT

When this function is activated, the video or

S-video signal can be emitted from the video, S-

video or component video output terminal.

To activate this function, select VIDEO CONVERT in

PREFERENCE menu and set ON.

Notes:

• The component video signal is emitted only from

component video output terminal.

When the video equipment is connected by

component terminal, connect the monitor and DN-

A7100 by the component terminal.

• This function is unavailable for the REC out

terminal.

•

This function is unavailable for the still picture, fast

forward and reverse playing of the video component.

• If, while attempting to use the video convert feature,

the DN-A7100 cannot synchronize with the display

device, “NO SIGNAL” appears on the monitor, or

noise is generated, this feature cannot be used. All of

these signs are caused by equipment incompatibility;

there is nothing wrong with the DN-A7100.

In such case, set VIDEO CONVERT in the

PREFERENCE menu to OFF. Also, connect the

video input signal to the display device via the

MONITOR OUT terminal under VIDEO and the

S-video input signal to the display device via the

MONITOR OUT terminal under S-VIDEO.

BASIC OPERATION

(PLAYBACK)

SELECTING AN INPUT SOURCE

Before you can listen to any input media, you must

ﬁ rst select the input source on the DN-A7100.

Example : DVD

To select DVD, turn the INPUT SOURCE knob on

the front panel or simply press the DVD button on

the remote.

After you have selected DVD, simply turn on the DVD

player and play the DVD.

• As the input source is changed, the new input

name will appear momentarily an OSD information

on the video display. The input name will also

appear in the display, on the front-panel.

• As the input is changed, the DN-A7100 will

automatically switch to the digital input, surround

mode, attenuation, and night mode status which

were entered during the conﬁ guration process for

that source.

• When an audio source is selected, the last video

input used remains routed to the VCR1 Output

and Monitor Output. This permits simultaneous

viewing and listening to different sources.

• When a Video source is selected, the video

signal for that input will be routed to the Monitor

Output jacks and will be viewable on a TV monitor

connected to the DN-A7100.

If a component video input is connected to the

DVD or DSS component inputs, it will be routed

to the Component Video Output. Make certain

that your TV is set to the proper input to view the

signal.

HDMI

VIDEO

S-VIDEO

HDMI

component

VIDEO

S-VIDEO

HDMI

component

Notes of OSD menu:

HDMI: OSD menu is not displayed.

VIDEO/S-VIDEO/component: VIDEO CONVERT

of HDMI is not possible, thus the OSD menu is not

displayed.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 47 48

Comments to this Manuals

No comments

Denon DN-A7100 - AV Surround Preamplifier User's Guide Page 29

Comments to this Manuals

Related products and manuals for AV receivers Denon DN-A7100 - AV Surround Preamplifier