Denon DN-A7100 - AV Surround Preamplifier User's Guide download pdf (Page 30)

ENGLISH

USING THE SLEEP TIMER

To program the DN-A7100 for automatic standby,

press the SLEEP button on the remote.

Each press of the button will increase the time before

shut down in the following sequence.

OFF 10 20 30 40

90 80 70 60 50

The sleep time will be shown for a few seconds in the

display on the front panel, and it will count down until

the time has elapsed.

When the programmed sleep time has elapsed, the

unit will automatically turn off.

Note that the SLEEP indicator on the display will

illuminate when the Sleep function is programmed.

To cancel the Sleep function, press the SLEEP

button until the display shows “SLEEP OFF” and the

SLEEP indicator will disappear.

NIGHT MODE

Press the NIGHT button on the remote to turn on the

NIGHT mode.

Selecting the Night Mode ON is effective in Dolby

Digital only, and it compresses the dynamic range.

This softens loud passages such as sudden

explosions, to help prevent disturbing others late

at night.

To turn off the Night mode, press the NIGHT button

again.

SELECTING THE SURROUND MODE

Example: AUTO SURROUND

To select the surround mode during playback, press

the SURROUND button on the front panel or the

SURROUND buttons on the remote.

ADJUSTING THE MAIN VOLUME

Adjust the volume to a comfortable level using the

VOLUME control knob on the front panel or VOL

+/– buttons on the remote.

To increase the volume, turn the VOLUME knob

clockwise or press VOL + button on the remote, to

decrease the volume, turn counterclockwise or press

VOL – button on the remote.

Notes:

• The volume can be adjusted within the range of – ∞

to 18 dB, in steps of 1 dB.

•

However, when the channel level is set as described

on page 21, if the volume for any channel is set at +1

dB or greater, the volume cannot be adjusted up to 18

dB.

(In this case the maximum volume adjustment range is

“18 dB - Maximum value of channel level)

ADJUSTING THE TONE (BASS & TREBLE)

CONTROL

During a listening session you may wish to adjust the

Bass and Treble Control to suit your listening tastes

or room acoustics.

(Using the remote control unit)

To adjust the bass effect, press BASS + or BASS

– on the remote.

To adjust the treble effect, press TREBLE + or

TREBLE – on the remote.

Note:

The tone control function can work in the AUTO

Surround, Stereo, Dolby PL

IIx

, DTS, DTS-ES, and

Multi Ch. Stereo mode.

TEMPORARILY TURNING OFF

THE SOUND

To temporarily silence all speaker outputs such as

when interrupted by a phone call, press the MUTE

button on the front panel or MUTE button on the

remote.

This will interrupt the output to all speakers and the

head-phone jack, but it will not affect any recording

or dubbing that may be in progress.

When the system is muted, the display will show

“MUTE” .

Press the MUTE button again to return to normal

operation.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 47 48

Comments to this Manuals

No comments

Denon DN-A7100 - AV Surround Preamplifier User's Guide Page 30

Comments to this Manuals

Related products and manuals for AV receivers Denon DN-A7100 - AV Surround Preamplifier