Denon DVD-M330 Operations Instructions download pdf (Page 37)

ENGLISH

Select and set the surround

parameters.

(On the remote control unit, use the

, cursor buttons to set the

parameters.)

If nothing is done for 4 seconds

from when the parameter is

displayed, the normal display

reappears.

Main unit

B Setting the DOLBY VS mode

2SP Ref. 2SP Wide

The mode is not displayed if it cannot be selected.

Remote control unit

Surround parameters (2)

DOLBY VS (Dolby Virtual Speaker mode)

• REF (Reference mode)

This is the standard mode.

• WIDE (Wide mode)

This mode expands the front channel sound field.

NOTES:

•Press the VIRTUAL button on the remote control unit during

playback in the Dolby Virtual Speaker mode to switch between

the 2-speaker, 3-speaker and 5-speaker modes.

2- and 3-speaker modes :The reference and wide modes can be

selected for the sound field of the

front 2-channel speakers. This is

convenient when it is difficult to install

a surround speaker.

5-speaker mode :The sound is played in the wide mode

expanding the 5.1-channel playback

and front 2-channel speaker sound

field. This is convenient when the front

speakers cannot be moved very far

apart.

• Switch between the reference and wide modes by selecting the

surround parameters in steps 3 and 4.

(4) Playing in the DSP surround modes

• This unit is equipped with a high performance DSP (Digital Signal Processor) which uses digital signal processing to synthetically recreate the

sound field. One of 2 preset surround modes can be selected according to the program source. (Analog and PCM sources only. Except 96kHz

PCM source.)

5CH STEREO

(M. CH STEREO)

HALL

When playing recordings of live music, this mode provides a feeling similar to actually being in a concert

hall.

When this mode is selected, the normal program source is directed to the main speakers and a reverberated sound

is directed to the surround speakers.

This mode is suited to program sources which contain a large amount of reverberation.

The Front left channel signals are output to the surround and surround back signal left channels,the front right

channel signals are output to the surround and surround back signal right channels, and the in-phase component

of the left and right channels is output to the center channel.

Use this mode to enjoy stereo sound.

Personal Memory Plus

This set is equipped with a personal memorize function that automatically memorizes the surround modes and input modes selected for the

input different sources. When the input source is switched, the modes set for that source last time it was used are automatically recalled.

• Settings automatically stored in the memory for the individual input functions using the Personal Memory Plus function:

q Surround mode (including 2-channel decode mode and Dolby Pro Logic II mode settings)

w Input mode selection function

The surround parameters, SDB/P.EQ control settings and playback level balance for the different output channels are memorized for each

surround mode.

Once the surround parameters have been set, stop

operating the buttons. After several seconds, the normal

display reappears and the settings are automatically

entered.

Downloaded From TheatreSystem-Manual.com Manuals

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 59 60

Comments to this Manuals

No comments

Denon DVD-M330 Operations Instructions Page 37

Comments to this Manuals

Related products and manuals for AV receivers Denon DVD-M330