Denon D-107 User Manual download pdf (Page 25)

ENGLISH

PLAYING MP3 FILES

2 There are many sites on the Internet from which you can download music files in MP3 format. These files

can be downloaded following the instructions on the site and stored on CD-R/RW discs which can then be

played on the D-107.

The music on commercially available music CDs can be converted into MP3 files on a computer using MP3

encoding programs. When this is done, the data is reduced to approximately 1/10 the original size. This MP3

data can then be stored on a CD-R/RW disc, allowing you to create a single 12 cm CD-R/RW disc containing

about 10 times more music than a normal music CD, that is some 100 tracks or more (*).

* This is an approximately value for MP3 files of tracks about 5 minutes long converted at a standard bit rate

(128 kbps) and stored on a CD-R/RW disc with a capacity of 650 MB.

Recordings you make are for your personal use and should not be used in ways infringing upon the

NOTES:

• The D-107 is compatible with “MPEG-1 Audio

Layer-3” and “MPEG-2 Audio Layer-3” standards

(sampling frequencies - 32 kHz, 44.1 kHz and 48

kHz). It is not compatible with “MPEG-2.5 Audio

Layer-3”, MP1 or MP2 standards.

• When writing MP3 files on a CD-R/RW disc, set

the writing program’s format to “ISO9660 level

1” or “ISO9660 level 2”, “Joliet”or “Romeo”.

MP3 files written in other formats may not play

properly. With some writing programs it is not

possible to record in “ISO9660” format. Use an

“ISO9660” format writing program.

• Generally speaking, the higher the MP3 file’s bit

rate, the better the sound quality. With the D-107

it is recommended to use MP3 files written with

a bit rate of 128 kbps or greater.

• The writing program may change the positions of

the folders and files when writing the MP3 files

on the CD-R/RW disc, so the files may not be

played in the expected order.

• Make sure to give MP3 files the extension

“.MP3”. Files with extensions other than “.MP3”

or without extensions cannot be played. (On

Macintosh computers, MP3 files can be played by

adding the extension “.MP3” after the file name

consisting of a maximum of 8 Roman capital

letters and/or numerals when recording them on

CD-R/RW discs.)

• To protect copyrights, no digital signals are output

when playing MP3 files.

• A maximum of 512 folders can be played on the

D-107. Folders over 8 layers down, however,

cannot be played. The maximum number of files

is also 512. If there are 513 files, only the first

512 are played. (Random playback is not possible

if there are 257 or more files. Files other than

those with the extension “.MP3” are not

counted.)

• On the D-107, folder and file names can be

displayed like titles. Roman capital letters and/or

numerals and “__” (underscores) are scrolled.

(However, a maximum of 12 characters can be

displayed in the “Joliet” mode and 32 characters

in the “Romeo” mode.) In addition, folder and file

names using other symbols will not be displayed

properly.

• The D-107E is compatible with ID3-tag (Ver. 1.*).

• It may not be possible to play some CD-R/RW

discs due to dirt, scratches or the disc’s

properties.

• Do not apply seals or tape to the label or signal

side of CDs or CD-R/RW discs. The glue could

get on the disc surface, making the disc get stuck

inside the set.

• The D-107 is multi-session compatible.

Only music CDs can be played if the first session

is a music CD, and only MP3 files can be played if

the first session consists of MP3 files.

• The D-107 is not compatible with packet write

programs.

• The D-107 is not compatible with play lists.

CLEAR

123

546

789

+1 0

TONE/SDB

REPEAT

CALL

PROG/

DIRECT

RANDOM

ENTERDISPLAY MENU

SLEEPFOLDERTITLETIME

STOP

/BAND

PLAY/PAUSE

VOLUME

FUNCTIONMUTE

PRESET

The single track repeat mode can also be set by

pressing the REPEAT button during playback.

The current track is played repeatedly.

To cancel the single track repeat mode, press

the REPEAT button repeatedly until the “”

indicator turns off.

Press the number buttons or 9,

8 buttons to input the number of

the desired track.

PRESET

123

546

789

+1 0

In the stop mode, press the

REPEAT button once.

• The “” indicator lights.

REPEAT

Step 3 can be skipped when a track is

selected using the number buttons.

Press the 1/3 button.

• Playback starts.

• Once the selected track ends,

it is played again from the

beginning.

PLAY/PAUSE

Playing a single track repeatedly [Single track repeat]

NOTE:

The single track repeat mode cannot be set

during programmed playback or random playback.

Press the REPEAT button once.

4th track 5th track3rd track

This operation is

repeated.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 79 80

Comments to this Manuals

No comments

Denon D-107 User Manual Page 25

Comments to this Manuals

Related products and manuals for CD players Denon D-107