Denon DN-S3500 Operations Instructions download pdf (Page 23)

ENGLISH

(15) MEMO ALL COPY :

Copy all MEMO data from the master unit of DN-S3500 (or DN-S3000 DN-S5000, DN-D9000) to the

slave unit of DN-S3500 (or DN-S3000 DN-S5000, DN-D9000) when both unit are connected by the

normal 3.5 mm min stereo Cable. (See diagram for the cable.)

NOTE: Be sure CD player have no discs inside.

A straight cable used:

• Using the 3.5 mm cable, connect the MEMO terminals between two DN-S3500 units or between one

DN-D9000 and one DN-S3500 unit or between one DN-S5000 and one DN-S3500 unit or between one

DN-S3000 and one DN-S3500 unit.

• Copying can be performed using the DN-S3500 and DN-D9000 or the DN-S3500 and DN-S3000 or the

DN-S3500 and DN-S5000 in the same way as when using two units of the DN-S3500.

DN-S3500

MEMO OUT

DN-S3500 (MEMO IN)

DN-S3000 (X’EFFECT IN)

DN-S5000 (X’EFFECT IN)

DN-S3500

MEMO IN

DN-S3500 (MEMO OUT)

DN-D9000 (X’EFFECT)

• Perform the copying operation as below on the slave unit of DN-S3500.

q To start copying, push the PARAMETERS knob and select “YES”. Now “Memo Copy?” messages

flashes on the character display.

w Push the PARAMETERS knob again to confirm. Now “Copy OK?” is displayed.

e Push the PARAMETERS knob once again, and the unit starts copying when the MEMO data are

received from the master unit. “Now Copying” is displayed.

• If the master unit and the slave unit are not connected properly or the DN-2600F is not prepared

to start sending data, “Not Connect” is displayed on the character display.

r When copying is completed correctly, “Complete!” is displayed.

• “Copy Error” is displayed on the character display if copying was not completed correctly.

• “Not connect” is displayed on the charactor display if it is not possible to communicate normally.

In this case, try the above procedure again.

• The copied MEMO data are added to the highest number area of the slave DN-S3500 unit.

(16) Version No. : The DN-S3500’s software version is displayed. (SYSTEM / DSP)

(17) PRESET INITIALIZE : Set all the preset data back to the factory defaults.

q To clear the PRESET data, push the PARAMETERS knob.

“Preset Int?” flashes on the character display.

w Push the PARAMETERS knob again.

“Preset Initial!” is displayed on the character display while data clearing.

e Once clearing is completed, “Complete!” is displayed.

PRESET

1. Preset mode

q The preset mode is available when @4 PRESET button is pushed for more than 1 sec while the DN-S3500

is in Cue, pause or no disc mode.

w Tu rn the @7 PARAMETERS knob to select the preset item.

e After selecting an item, push the @7 PARAMETERS knob to select the preset data.

r To change other Preset items, repeat these steps.

t Push the @4 PRESET, o CUE or u PLAY / PAUSE (

13) button to exit from the Preset mode.

2. Preset items and data

The “*” mark next to the data indicates the default value.

(1)

Cue Mode : DENON* (When the playback is started durnig the Play Pause mode, the Cue point is set.) /

Other (When the Cue button is pushed during the Play Pause mode, the Cue point is set.)

(2) Auto Cue : Auto Cue level search on/off. (ON* / OFF)

(3) Next Tr Time : OFF / 1sec / 2sec* / 3sec

Select the time for fading out the currently playing track when playback of a new track is started with

the next track function.

(4) Platter Speed : 33rpm* / 45rpm

Select the rotational speed on the platter.

(5) 3/4 Effect : OFF* / ON

You can use 3/4 beat effects when you select the Echo & Flanger parameter for the effector.

(6) Jump Time : 10sec* / 20sec / 30sec / 1min

Select the jump time of Quick Jump.

(7) Pitch Range : ±4% / ±10%* / ±16% / ±24%

Select the playing pitch range when the power is turned on.

(8) EOM Time : Track end warning message alert time.

(OFF / 10sec* / 15sec / 20sec / 30sec / 60sec / 90sec)

(9) Fader Mode (FADER START MODE) : Play / Cue* / P / Pause

Select 2-line type (Play and Cue) or 1 line type (Play and Pause).

(10) Power On Play : ON / OFF*

Playback starts when the power is turned on if a disc is loaded.

(11) Pitch : Pitch ON* / Key AdjON (KEY ADJUST ON) / Pitch OFF

Select the pitch mode when the power is turned on.

(12) Play Mode (SINGLE / CONTINUOUS / SINGLE PLAY LOCK) : Single / Cont. / Play Lock*

Select the play mode when the power is turned on.

(13) Time Mode : Elapsed* / Remain / T.Elapsed / T.Remain

Select the time mode when the power is turned on.

(14) MEMO ALL CLEAR :

Clear all MEMO data in the non-volatile memory.

q To clear all MEMO data, push the PARAMETERS knob.

• “Memo Clr?” flashes in the character display.

w Push the PARAMETERS knob again and select “Yes” to execute clearing all MEMO data.

• “Now Clearing!” is displayed on the character display while clearing.

e Once clearing is completed, “Complete!” is displayed.

POWER ON OFF

DIGITAL OUT

L

R

LINE OUTFADER IN OUT

MEMO

POWER ON OFF

DIGITAL OUT

L

R

LINE OUTFADER IN OUT

MEMO

MEMO IN jack

DN-S3500-1 DN-S3500-2

MEMO OUT jack

3.5 mm stereo mini cord

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 42 43

Comments to this Manuals

No comments

Denon DN-S3500 Operations Instructions Page 23

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-S3500