Denon AVR-3600 User Manual download pdf (Page 26)

Ш Multi-source and multi-zone playback

MULTI ROOM MUSIC ENTERTAINMENT SYSTEM

e When the outputs of the MULTI SOURCE AUDIO/VIDEO OUT terminals are wired and connected to integrated amplifiers or TV displays installed

in other rooms, different sources can be played in rooms other than the main room in which this unit and the playback devices are installed. (Refer

to ANOTHER ROOM on the diagram below.)

® When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the main room and

another room, the remote-controllable devices in the main room can be controlled from another room using the remote control unit.

To control playback devices other than the ones above, either use that device's remote control unit or preset a separately sold programmable

remote control unit.

NOTES:

® Use a 75 £3/ohms coaxial pin-plug cord for video signals to connect and wire the MULTI SOURCE VIDEO output. For the AUDIO output,

use high quality pin-plug cords and wire in such a way that there is no humming or noise.

® For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.

MULTI ROOM MUSIC ENTERTAINMENT SYSTEM

=«« ROOM~TO~ROOM RgMOTE CONTROL SYSTEM

(separately sold) control line

“ MULTI SOURCE AUDIO signal cable

■ • MULTI SOURCE VIDEO signal cable

(75 0/ohms)

— SPEAKER cable

Refer to CONNECTIONS on pages 6 and 7.

8-12 System call (remote control unit)

This function allows you to preset frequently used operation patterns in the remote control unit then automatically send a series of up to ten remote

control codes with a single button. ^

Presetting

1. Press the SET button.

2. Press the buttons for the codes to be sent, changing

the position of the slide switch as necessary. (Up to

ten buttons can be set.)

Buttons which have been "learned" and buttons

which have been preset can also be selected.

3. Press the SYSTEM CALL button ("1" or

which you want to store the codes.

The setting is now stored.

'2") at

m CD

SYSTEM CALLC

Recalling

4. Press the SYSTEM CALL button ("1" or

which the desired codes have been stored.

The series of codes is now sent.

CD CD

SYSTEM CALLS

[Fj USING THE SURROUND FUNCTION

'2") at

CD CDllCZ)

_____

Q E) 0 [>

T ypLUM-E *■ _ OiSC giilf-»

® ^ GD CD

Щ l(3.........

О © @ I ®

LISCOSI SSBiPEiiaE&ydSi

® ® © ®

ЩИ Щ®

® ® (Щ.

CD о о A

9-1 Dolby Surround

This unit is equipped with digital signal processing sections for decoding and reproducing movie soundtracks the same way as in movie theaters.

1. DOLBY SURROUND PRO LOGIC

When using conventional video tapes, laser discs, TV programs or CDs with the mark, Dolby Pro Logic provides extremely

natural sound movement and positioning, immersing you in the on screen action. Pro Logic uses a directional emphasis circuit to decode four

output channels (front left and right, center and surround) from the two audio channels provided on the software.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Comments to this Manuals

No comments

Denon AVR-3600 User Manual Page 26

Comments to this Manuals