Denon AVR-985 User Manual download pdf (Page 40)

Enter the setting.

The Input Setup Menu reappears.

NOTE:

Down-converting from the component video signal to the S-Video and composite video signal is not possible, so when not using the

component video monitor output terminal connect the player using the S-Video or composite video input terminal.

Cautions on the video conversion function:

When the component video terminals are used to connect the AVR-2805/985 with a TV (or monitor, projector, etc.) and the video (yellow)

or S video terminals are used to connect the AVR-2805/985 with a VTR, depending on the combination of the TV and VTR the picture may

flicker in the horizontal direction, be distorted, be out of sync or not display at all when playing video tapes.

If this happens, connect a commercially available video stabilizer, etc., with a TBC (time base corrector) function between the AVR-

2805/985 and the VTR, or if your VTR has a TBC function, turn it on.

(Remote control unit)

3-5

Auto Tuner Presets

Use this to automatically search for FM broadcasts and store up to 56 stations at preset channels A1 to 8, B1 to 8, C1 to 8, D1 to 8, E1 to 8, F1

to 8 and G1 to 8.

NOTE:

• If an FM station cannot be preset automatically due to poor reception, use the “Manual tuning” operation to tune in the station, then preset it

using the manual “Preset memory” operation.

Select “Auto Tuner Presets”at the Input Setup Menu.

Display the Auto Preset Memory screen.

Press the CURSOR left button to select “Yes”.

“Search” flashes on the screen and searching begins.

“Completed” appears once searching is completed.

The display automatically switches to screen.

(Remote control unit)

Auto Tuner

*Input Setup

(Remote control unit)

Start :Yes

*Auto Tuner

(Remote control unit)

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 99 100

No comments

Denon AVR-985 User Manual Page 40