Denon AVR-4802R User Manual download pdf (Page 16)

SETTING UP THE SYSTEM

SYSTEM SETUP button

Press this to display the system setup menu.

ENTER button

Press this to switch the display.

Also use this button to complete the setting.

CURSOR buttons

and

: Use these to move the cursors (

and

) to the

left and right on the screen.

•

and

: Use these to move the cursors (

•

and

) to the

up and down on the screen.

• Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 6 to 13), make the

various settings described below on the monitor screen using the AVR-4802R’s on-screen display function.

These settings are required to set up the listening room’s AV system centered around the AVR-4802R.

• Use the following buttons to set up the system:

• Check that the remote control unit is set to AMP mode.

• System setup items and default values (set upon shipment from the factory)

System setup Default settings

Speaker

Configuration

Surround

Speaker

Setting

Subwoofer mode

Channel

Level

Subwoofer

Peak Limit

Lev

Digital In

Assignment

On Screen

Display

Auto Tuner

Presets

Input the combination of speakers in your system and their

corresponding sizes (Small for regular speakers, Large for full-

size, full-range) to automatically set the composition of the

signals output from the speakers and the frequency response.

Use this function when using multiple surround speaker

combinations for more ideal surround sound. Once the

combinations of surround speakers to be used for the

different surround modes are preset, the surround

speakers are selected automatically according to the

surround mode.

This selects the subwoofer speaker for playing deep bass signals.

(see page 20)

This adjusts the volume of the signals output from the speakers and

subwoofer for the different channels in order to obtain optimum

effects.

This parameter is for detecting the maximum level of the low bass

signals output from the subwoofer channel in order to protect the

subwoofer from damage and prevent unpleasant distorted sounds

from being produced.

This assigns the digital input jacks for the different input

sources.

This sets whether or not to display the on-screen display that

appears on the monitor screen when the controls on the remote

control unit or main unit are operated (from MONITOR 1 outputs

only).

FM stations are received automatically and stored in the memory.

Surround

mode

Surround

speaker

Input

source

Digital

Inputs

Front Sp.

Small

Center Sp. Surround Sp.Subwoofer

Small SmallYes

DOLBY/

DTS

SURROUND

THX /

THX 5.1

WIDE

SCREEN

5CH/7CH

STEREO

DSP

SIMULATION

EXT. IN

——

A A AAAA ——

LFE —THX—

Front L & R Center Surround L & RSubwoofer

12 ft (3.6 m) 12 ft (3.6 m) 10 ft (3.0 m)12 ft (3.6 m)

Front L

Front R Center

Surround

Back R

Subwoofer

0 dB 0 dB 0 dB 0 dB 0 dB 0 dB

Peak Limiter = OFF

CD DVD VDP TV

DBS/SAT

VCR-1 VCR-2

V. AUX

COAXIAL

OPTICAL

OFF

On Screen Display = ON

A1 ~ A8

B1 ~B8

C1 ~C8

D1 ~D8

E1 ~E8

87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz

520/600/1000/1400/1500/1710 kHz/90.1/90.1 MHz

90.1 MHz

Surround Back Sp.

Small / 2spkrs

Delay Time

This parameter is for optimizing the timing with which the audio

signals are produced from the speakers and subwoofer according

to the listening position.

SBL & SBR

10 ft (3.0 m)

Multi Zone

Control

Set this to switch the surround back channel’s

power amplifier for use for multi-zone 2.

Surround Back

Surround

Back L

0 dB

Surround

0 dB

Power AMP

Assignment

Multi Zone-1

vol. Level

This sets the output level for the multi-zone 1

output jacks.

Variable

TAPE

OPTICAL

VCR-3

OFF

—

Crossover

Frequency

Set the frequency (Hz) below which the bass sound of the various

speakers is to be output from the subwoofer.

FIXED —THX—

THX Audio

Setup

When using a THX Ultra2 compatible

subwoofer, set the subwoofer’s frequency

response.

THX Ultra2 Subwoofer = NO

Boundary Gain

compensation

Surround Back

Speaker Position

When using two surround back speakers, set

the distance of the two speakers.

The Distance Between SBL/SBR = 0 ft to 1 ft

Audio Delay Adjust the time delay of the video and audio signals. (see page 30) Audio Delay = 0 ms

Setup Lock

Set whether or not to lock the system setup settings so that they

cannot be changed.

Setup Lock = OFF

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 89 90

Comments to this Manuals

No comments

Denon AVR-4802R User Manual Page 16

Comments to this Manuals

Related products and manuals for Receiver Denon AVR-4802R