Denon AVR-4802R User Manual Page 89
- Page / 90
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
89
17
SPECIFICATIONS
2 Audio section
• Power amplifier
Rated output: Front: 125 W + 125 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
150 W + 150 W (6 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
Center: 125 W + 125 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
150 W + 150 W (6 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
Surround: 125 W + 125 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
150 W + 150 W (6 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
Surround Back 125 W + 125 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
/Multi: 150 W + 150 W (6 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
Dynamic power: 170 W x 2 ch (8 Ω/ohms)
270 W x 2 ch (4 Ω/ohms)
350 W x 2 ch (2 Ω/ohms)
Output terminals: Front/Center/Surround Back: 6 ~ 16 Ω/ohms
Surround: A or B 6 ~ 16 Ω/ohms
A + B 8 ~ 16 Ω/ohms
• Analog
Input sensitivity / input impedance: 200 mV / 47 kΩ/kohms
Frequency response: 10 Hz ~ 100 kHz: +0, –3 dB (DIRECT mode)
S/N: 105 dB (DIRECT mode)
Distortion: 0.005% (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output: 1.2 V
• Digital
D/A output: Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.005% (1 kHz, at 0 dB)
S/N ratio — 110 dB
Dynamic range — 108 dB
Digital input: Format — Digital audio interface
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity: 2.5 mV
RIAA deviation: ±1 dB (20 Hz to 20 kHz)
Signal-to-noise ratio: 74 dB (A weighting, with 5 mV input)
Rated output / Maximum output: 150 mV / 8 V
Distortion factor: 0.03% (1 kHz, 3 V)
2 Video section
• Standard video jacks
Input / output level and impedance: 1 Vp-p, 75 Ω/ohms
Frequency response: 5 Hz ~ 10 MHz — +0, –3 dB
• S-video jacks
Input / output level and impedance: Y signal — 1 Vp-p, 75 Ω/ohms
C signal — 0.286 Vp-p, 75 Ω/ohms
Frequency response: 5 Hz ~ 10 MHz — +0, –3 dB
• Color component video terminal
Input / output level and impedance: Y signal — 1 Vp-p, 75 Ω/ohms
PB/CB signal — 0.7 Vp-p, 75 Ω/ohms
PR/CR signal — 0.7Vp-p, 75 Ω/ohms
Frequency response: DC ~ 50 MHz — +0, –3 dB
2 Tuner section
[FM] (note: µV at 75 Ω/ohms, 0 dBf = 1 x 10
–15
W) [AM]
Receiving Range: 87.5 MHz ~ 107.9 MHz 520 kHz ~ 1710 kHz
Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV
50 dB Quieting Sensitivity: MONO 1.6 µV (15.3 dBf)
STEREO 23 µV (38.5 dBf)
Signal to Noise Ratio (IHF-A): MONO 79 dB 50 dB
STEREO 74 dB
Total Harmonic Distortion (at 1 kHz): MONO 0.15%
STEREO 0.3%
2 General
Power supply: AC 120 V, 60 Hz
Power consumption: 10.5 A
Maximum external dimensions: 434 (W) x 179 (H) x 485 (D) mm (17-3/32” x 7-3/64” x 19-3/32”)
Mass: 20.5 kg (45 lbs 3.1 oz)
2 Remote control unit (RC-932)
Batteries: R6P/AA Type (three batteries)
External dimensions: 58 (W) x 230 (H) x 37 (D) mm (2-9/32” x 9-1/16” x 1-29/64”)
Mass: 230 g (Approx. 8 oz) (including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.
- WARNING: 2
- ATTENTION 2
- SAFETY INSTRUCTIONS 3
- TABLE OF CONTENTS 4
- BEFORE USING 4
- CAUTIONS ON INSTALLATION 4
- CAUTIONS ON HANDLING 5
- FEATURES 5
- R/CR, PB/CB) 5
- CONNECTIONS 6
- Connecting video components 7
- Connecting a monitor TV 8
- Connecting the video decks 8
- VIDEO OUT 9
- COMPONENT 9
- VIDEO IN 9
- AM loop antenna assembly 10
- Connection of AM antennas 10
- INFRARED SENSOR 11
- Protector circuit 12
- Note on speaker impedance 12
- Connections 13
- PART NAMES AND FUNCTIONS 14
- Remote control unit 15
- SETTING UP THE SYSTEM 16
- SB SB SB SB 17
- Before setting up the system 18
- Setting the type of speakers 18
- Crossover frequency 20
- Setting the Subwoofer mode 20
- Setting the delay time 21
- Setting the channel level 23
- FL C FR SR SBR SBL SL SW 24
- Adjusting the audio delay 30
- Auto tuner presets 31
- Protecting the settings 31
- After completing system setup 32
- REMOTE CONTROL UNIT 33
- Inserting the batteries 33
- Preset memory 35
- 6,7 : Manual search 37
- 2 : Stop 37
- 3 : Pause 37
- Learning function 38
- 1, 4, 81, 4, 8 38
- System call 39
- Punch Through 40
- Resetting 41
- OPERATION 46
- Playing the input source 47
- MASTER VOLUME 48
- (Main unit) 49
- (Remote control unit) 49
- After starting playback 50
- IN=V SOURCE 51
- RECOUT SOURCE 52
- M-ZONE SOURCE 53
- ANOTHER ROOM MAIN ROOM 54
- (ON-OFF) 54
- AVR-4802R 55
- CONTROL UNIT 55
- SURROUND 56
- Fader function 57
- INPUT MODE 59
- PARAMETER 59
- Checking the input signal 61
- INPUT SELECTOR 62
- DIAL.NORM 63
- OFFSET + 4dB 63
- Dolby Surround Pro Logic 64
- II Mode: 65
- DTS Neo:6 mode 66
- Adjusting the Audio Delay 67
- DENON ORIGINAL SURROUND MODES 68
- DSP surround simulation 69
- Tone control setting 70
- Surround modes and parameters 71
- LISTENING TO THE RADIO 73
- Checking the preset stations 74
- LAST FUNCTION MEMORY 75
- TROUBLESHOOTING 76
- ADDITIONAL INFORMATION 77
- Surround back speakers 78
- Speaker setting examples 79
- Surround 81
- 2 DTS-ES 83
- 2 DTS Neo:6 83
- SPECIFICATIONS 89
- Telephone: (03) 3837-5321 90
Related products and manuals for Receiver Denon AVR-4802R
Receiver Denon AVR-788 User Manual
(74 pages)
(74 pages)
Receiver Denon S-302 User Manual
(58 pages)
(58 pages)
Receiver Denon POA-A1HDCI User Manual
(124 pages)
(124 pages)
Receiver Denon AVC-A1XV User Manual
(70 pages)
(70 pages)
Receiver Denon AVR-1507 User Manual
(64 pages)
(64 pages)
Receiver Denon AVR-688 User Manual
(68 pages)
(68 pages)
Receiver Denon AVR-3313CI User Manual
(10 pages)
(10 pages)
Receiver Denon AVR-4308 User Manual
(116 pages)
(116 pages)
Receiver Denon AVR-5308CI User Manual
(132 pages)
(132 pages)
Receiver Denon AVR-985SP User Manual
(2 pages)
(2 pages)
Receiver Denon AVR-3310 User Manual
(2 pages)
(2 pages)
Receiver Denon AVR-E200 User Manual
(12 pages)
(12 pages)
Receiver Denon AVR-3313CI Specifications
(24 pages)
(24 pages)
Receiver Denon DRA-F109 Owner's Manual
(14 pages)
(14 pages)
© 2020, manymanuals.com. All rights reserved. | 0.150 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals