Denon AVR-4802R User Manual download pdf (Page 18)

Before setting up the system

Check that all the connections are correct,

then turn on the main unit’s power.

Display the System Setup Menu.

ON / STANDBY

(Main unit)

• The composition of the signals output to the different channels and the frequency response are adjusted automatically according to the

combination of speakers actually being used.

At the System Setup Menu select “Speaker Configuration”.

Switch to the speaker configuration screen.

Set whether or not speakers are

connected and, if so, their size

parameters.

• To select the speaker

• To select the parameter

Enter the setting.

a) If no surround speakers are used (if “None” is set for both A and B):

The Crossover Frequency screen reappears.

b) If both surround speakers A and B are used (if either “Large” or “Small” is set for both A and B):

The surround speaker setting screen appears.

c) When “Front” is set to “Large” and “Subwoofer” is set to “Yes”, the subwoofer mode screen reappears.

d) If “None” is set for surround speakers A:

“None” is automatically set for surround speakers B and surround back speaker.

Center Sp.

Front Sp.

Subwoofer

Surround Sp. A

Surround back Sp.

Surround Sp. B

Setting the type of speakers

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 89 90

No comments

Denon AVR-4802R User Manual Page 18