Denon S-301 User Manual download pdf (Page 39)

ENGLISH

Basic Operation Basic Operation

ENGLISH

Press the CURSOR

•

button to set

the current time, then press the ENTER button.

Press the ENTER button to enter the setting.

•To check the current time when the regular display is displayed,

press the STATUS button once.

• The time can be displayed by pressing the STATUS button when

the power is in the standby mode. (When this is done, the set

is no longer in the low power consumption standby mode.)

When pressed twice while the time is displayed, the display

turns off and the set is put back in the low power consumption

standby mode ( page 59).

• The clock runs by synchronizing with the power supply

frequency. The time may be off by 2 to 3 minutes per month. If

so, reset the time.

Press the ENTER button twice to change the

current time.

Example: When the current time is set to “PM 7:30”

Setting the sleep timer

• The included remote control unit can be used to turn the power

to the standby mode after a maximum of 120 minutes. (Sleep

timer)

• Use this function to automatically switch the power to the

standby mode after a specific amount of time (minutes).

Example: To set the power to the standby mode in 50 minutes

according to the clock.

Select and play the desired function.

Press the SLEEP button.

• “120” is displayed and the “SLEEP” indicator flashes.

120

The display switches as follows each time the SLEEP button

is pressed:

90120 60 50 3040 20 10

“SLEEP” indicator off

When the “SLEEP” indicator is flashing, press

the SLEEP button again until “50” is displayed.

• “50” is displayed and the “SLEEP” indicator flashes.

After 4 seconds, the display returns to as it was before the

sleep timer was set, and the “SLEEP” indicator stops

flashing, remaining lit. (This completes the sleep timer

setting.)

The power is set to the standby mode 50 minutes

later.

To turn the sleep timer off, press the SLEEP button

repeatedly until the “SLEEP” indicator turns off. The sleep

timer can also be turned off by press the ON/STANDBY

switch on the main unit or the remote control unit to turn the

entire system’s power to the standby mode.

• If the SLEEP button is pressed while the sleep timer is

operating, the setting returns to 120 minutes. Make the setting

over.

• If the sleep timer and everyday timer settings overlap, the sleep

timer has priority.

8:00p.m. 9:00p.m. 10:00p.m.

ON OFF

8:00p.m. 9:00p.m. 10:00p.m.

ON OFF

• Also, the everyday timer will not operate if its start time is set

within the time during which the sleep timer is operating.

Everyday timer

once timer setting

Sleep timer

setting

Timer operation

If the timers overlap like this, the timer operates as follows:

Everyday timer

once timer setting

Sleep timer

setting

Does not operate

• The remaining time of the sleep timer can be checked with

the STATUS button.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 147 148

Comments to this Manuals

No comments

Denon S-301 User Manual Page 39

Comments to this Manuals

Related products and manuals for Acoustics Denon S-301