Denon AVR-1906 User Manual download pdf (Page 13)

ENGLISH

Easy Setup and Operation Easy Setup and Operation

About error messages

• These error screens may be displayed when performing Auto Setup measurement and the automatic measurements can not be

completed because of the speaker arrangement, measurement environment, or other factors. Please check the following matters,

reset the pertinent items, and measure again.

• When there is too much noise in the room, the speakers may not be detected properly. Should this happen, perform the

measurements when the noise level is low, or switch off the power of the equipment that is producing the noise for the duration

of the measurements.

MeasuresCauseScreen example

q This screen will be displayed when the speakers

required for producing suitable reproduction have

not been detected.

• The front L or front R speaker was not properly

detected.

• Only one channel of the surround speakers was

detected.

• Sound was output from the R channel when only

one surround back speaker was connected.

• The surround back speaker was detected, but the

surround speaker was not detected.

• Check that the pertinent speakers are

properly connected.

w This screen will be displayed when the speaker

polarity is connected in reverse.

• Check the polarity of the pertinent

speakers. For some speakers, this

screen may be displayed even though

the speakers are properly connected. If

so, select “Skip

”.

e This screen will be displayed when accurate

measurements cannot be made due to the input

level of the microphone being too high.

• Set up the speakers so that their position

is farther away from the listening

position.

• Lower the volume of the subwoofer

speaker.

r This screen will be displayed when the

measurement microphone is not connected.

• Connect the measurement microphone

to the microphone connector.

Check of the measurement results

Press the CURSOR

button to select an

item, then press the ENTER button.

Press the ENTER button.

• The verification screen appears.

Example: Speaker Config. Check

Press the ENTER button again once you have

checked the results.

The measurement results of each item can be checked

here.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 66 67

Comments to this Manuals

No comments

Denon AVR-1906 User Manual Page 13

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-1906