Denon AVR-5805 Operations Instructions download pdf (Page 10)

Connecting Audio Components

• When making connections, also refer to the operating instructions of the other components.

OUTPUT INPUT

OPTICAL

RLRL

OUTPUT INPUT

OUTPUT

OPTICALCOAXIAL

OUTPUT

R L R L

DIGITAL AUDIO

CD player

Connecting a CD player

Connect the CD player’s analog output

jacks (ANALOG OUTPUT) to this unit’s CD

jacks using pin plug cords.

Connecting a turntable

Connect the turntable’s output cord to the AVR-5805’s

PHONO jacks, the L (left) plug to the L jack, the R

(right) plug to the right jack.

NOTE:

This unit cannot be used with MC cartridges

directly. Use a separate head amplifier or step-up

transformer.

If humming or other noise is generated when the ground wire is connected,

disconnect the ground wire.

Turntable

(MM cartridge)

Ground wire

AC cord

(Supplied)

Connecting the pre-out jacks

Use these jacks if you wish to connect external power amplifier(s) to increase

the power of the front, center, surround and surround back sound channels,

or for connection to powered loudspeakers.

When using only one surround back speaker, connect it to left channel.

Connecting the AC OUTLETS

AC OUTLETS

• SWITCHED (total capacity – 120 W (1 A.))

The power to these outlets is turned on and off in conjunction with the POWER switch on the main unit, and when the

power is switched between on and standby from the remote control unit.

No power is supplied from these outlets when this unit’s power is at standby. Never connect equipment whose total

capacity is above 120 W (1 A.)

NOTES:

• Only use the AC OUTLETS for audio equipment. Never use them for hair driers, TVs or other electrical appliances.

• The AC outlets can be set to turn on and off for the different functions.

For details, see “Setting the AC Outlet Assign”. (See pages 109, 110)

AC outlets (wall)

AC 120V, 60Hz

MD recorder, CD recorder or other

component equipped with digital

input/output jacks

CD player or other component

equipped with digital output jacks

Connecting the DIGITAL jacks

Use these for connections to audio equipment with

digital output. Only one type of connector needs to

be used, you can decide which based on availability

of coaxial and optical inputs. Refer to pages 58, 59

for instructions on setting this terminal.

NOTES:

• Use 75 1/ohms cable pin cords for coaxial connections.

• Use optical cables for optical connections, removing the

cap before connecting.

Connecting a tape deck

Connections for recording:

Connect the tape deck’s recording input jacks (LINE IN or REC) to this unit’s

tape recording (OUT) jacks using pin plug cords.

Connections for playback:

Connect the tape deck’s playback output jacks (LINE OUT or PB) to this unit’s

tape playback (IN) jacks using pin plug cords.

CD recorder or Tape deck

DENON Link terminal

Use this terminal to connect a DENON DVD player for

high quality digital multichannel sound.

(See page 18)

Route the connection cords, etc., in such a way that

they do not obstruct the ventilation holes.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 207 208

Comments to this Manuals

No comments

Denon AVR-5805 Operations Instructions Page 10

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-5805