Denon AVR-5805 Operations Instructions download pdf (Page 32)

Before performing the Auto Setup procedure

Check again that the speakers are securely connected to the AVR-5805.

Set the volume to halfway and set the crossover frequency to the maximum or Low pass filter off if your subwoofer can adjust the output

volume and the crossover frequency. Some subwoofers have a standby mode. Be sure to turn this function off before performing the

Auto Setup procedure.

The auto setup procedure uses the OSD (on-screen display) function, so connect the AVR-5805 to a TV, projector, or other monitor.

. Connecting the microphone for Auto Setup

Connect the optional microphone for Auto Setup to the Setup Mic connector on the front panel of the unit.

NOTES:

• The optional standard microphone is DENON DM-S305 sold

separately.

• When using other microphone, see pages 42, 43.

Mount the auto setup microphone onto a camera tripod, etc.,

and place it at ear height at the main listening position (*) in

the listening room with the sound receptor facing the ceiling.

When placing the microphone, adjust the height so that the

microphone’s sound receptor is at the height of the ears of

the listener.

Be sure that at the beginning, the measurement is started

with the microphone set up at the main listening position.

NOTE:

• Do not disconnect the microphone until the settings are

completed.

Microphone

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 207 208

No comments

Denon AVR-5805 Operations Instructions Page 32