Denon AVR-882 Operations Instructions download pdf (Page 9)

r_ CONNECTIONS

• Do not plug in the power cord until all connections have been

completed.

• Be sure to connect the left and right channels properly (left with

left, right with right).

• Insert the plugs securely. Incomplete connections will result in

the generation of noise.

• Use the AC OUTLETS for audio equipment only. Do not

use them for hair driers, etc.

• Note that binding pin plug cords together with power cords or

placing them near a power transformer will result in generating

hum or other noise.

• Noise or humming may be generated if a connected audio

equipment is used independently without turning the power

of this unit on. If this happens, turn on the power of this unit.

• Analog recording of signals input to the AVR-1802 in digital format is not possible. To record in analog, also connect the analog signals of the

player to the AVR-1802% analog input terminals.

• The AVR-1802's OPTICAL OUT terminal is an optical digital output terminal for connection of a CDR recorder, MD recorder or other digital

recording device. Use it for digital recording.

I Connecting a turntable I

Connect the turntable's output cord to this

unit's PHONO jacks, the L (left) plug to the L

jack, the R (right) plug to the right jack.

NOTE:

This unit cannot be used with MC

cartridges directly. Use a separate head

amplifier or step-up transformer.

If humming or other noise is generated when

the ground wire is connected, disconnect the

ground wire.

Tumtable

(MM cartridge)

Ground wire

LINE OUT

I Ioo_O_l

Decoders with 6-channel

analog outputs, etc.

u.I

INPUT OUTPUT

R L R L

Tape deck or CD recorder

[ Connecting a tape deck I

Connections for recording:

Connect the tape deck's recording input jacks (LINE IN or REC) to this

unit's tape recording (OUT) jacks using pin plug cords.

Connections for playback:

Connect the tape deck's playback output jacks (LINE OUT or PB) to

this unit's tape playback (IN) jacks using pin plug cords.

{ Connecting the pre-out jacks 1

Use these jacks if you wish to connect external power amplifier(s) to increase the

power of the front and center channels, or for connection to powered !oudspeakers.

Connect the internal amplifier's subwoofer to the subwoofer terminal. (Refer to

page 14.)

AC 120V, 60Hz

%oo

,, ,,

L__._=_=_..... "1

SpEAKERSYSTEMS _MACOUTLFSi

® FRONT ® CENTER SURReUNO AC_eV_

® (k ® _ ® _ TOTSWITCHEDA

I I

[ Connecting the AC OUTLETS 1

AC OUTLETS

SWITCHED

(total capacity - 120 W (1 A.))

The power to these outlets is turned on and off in conjunction with the POWER switch on the main

unit, and when the power is switched between on and standby from the remote control unit.

No power is supplied from these outlets when this unit's power is at standby. Never connect

equipment whose total capacity is above 120 W (1 A.)

NOTE:

Only use the AC OUTLETS for audio equipment Never use them for hair driers, TVs or other

electrical appliances.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 95 96

Comments to this Manuals

No comments

Denon AVR-882 Operations Instructions Page 9

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-882