Denon UD-M31 Operations Instructions Page 28
- Page / 34
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
28
• When stopping the PICK REC function, be sure to perform the operation described below to write the data on the disc.
1
2
3
Press the 2 (stop) button.
• Recording stops and the PICK REC indicator turns off.
•“
P. Rec OK?
” is displayed.
• In addition, once the time for which PICK REC recording is possible is up, the stop mode is set automatically
and “
P. Rec OK?
” is displayed.
(If the tracks to be recorded have been properly picked)
Press the ENTER button.
•“
P. Rec Edit
” is displayed.
• Only the tracks for which “record” was selected during the PICK REC mode are stored on the disc.
• Do not perform any other operation while “
P. Rec Edit
” is displayed, or the recording may be lost or
may not be properly stored on the disc.
• The TOC data is written once the “
P. Rec Edit
” display turns off.
(If the tracks to be recorded have not been properly picked)
Press the
2 (stop) button.
•“
P. Rec Cancel
” is displayed.
• All the tracks played since the PICK REC mode was set are stored on the disc.
• If the power is set to the standby mode by pressing the power operation button during the PICK REC mode, all the
tracks played since the PICK REC mode was set are stored on the disc.
• The “
P. Rec OK?
” display may appear if the PICK REC mode is canceled several seconds after it is set, but it
may happen that no track has be recorded.
NOTE:
• When writing the TOC data starts, “” indicator flashes. Do not subject this unit to shocks or unplug the power
supply cord while the data is being written, or the recording may be lost or may not be properly stored on the disc.
1
18Tr02m 46s
-60 -40 -30 -20 -12 -6 -2 0
L
dB
R
PUSH
ENTER
MINIDISC RECORDER DMD-M31
8
9
POWER LOADING MECHANISM
MULTI REC
CD SRS
MEMORY REC
CHARACTER/
TIME/INPUT
EDIT
ON / STANDBY
1
2
2. Stopping the PICK REC function
15
SYSTEM FUNCTIONS
(1) System connection
(2)
Auto power on function (when connected
to the
D-M31
series components)
1
Press the 1/3 (play/pause) button.
• System’s power turn on and the function of CD
receiver automatically switches to “MD”.
And then, the MD starts playing.
✽ When a MD is loaded with the DMD-M31 in the
standby mode, MD playback can be started simply
by pressing the
1/3 (play/pause) button on the
system remote control unit.
✽ When the CD receiver (UD-M31/M51) is in the
standby mode, the system power does not turn on
even if the
1/3 (play/pause) button on the main
unit is pressed.
2 Operation is even easier when the components in the
D-M31 series are connected to the DMD-M31 with
system connections. (For instructions on connections,
refer to the respective operating instructions of CD
receiver (UD-M31/M51).
2 The system functions will only work when the
components of the D-M31 series are connected. They
will not work with other components.
2 The system function signals for operating the
components in the D-M31 series are all output from
the CD receiver (UD-M31/M51). Thus, when making
system connections, be sure to connect the CD
receiver (UD-M31/M51).
2 When the system is set to the standby mode, you can
start the playback of disc simply by pressing the 1/3
(play/pause) button.
+1010
PANEL
CALL
DISC
SKIP
GROUP
CT
PTY
REPEAT
RDS
RANDOM
TITLE/CHARACTER TIME
EDIT
TUNING TUNING
ENTER
MEMORY
TONE/SDB
TUNER
PRESET
BAND
CD-R MD
CD
123
654
987
CLEAR
TAPE
DISPLAY
VOLUME
FUNCTION
SLEEP
SYSTEM
POWER
PROG/
DIRECT
1
System remote
control unit
(3)
Auto function selection (when connected
to the D-M31 series)
2 Use this function to switch the function to “MD” and
start playing the disc simply by pressing a single button.
+1010
PANEL
CALL
DISC
SKIP
GROUP
CT
PTY
REPEAT
RDS
RANDOM
TITLE/CHARACTER TIME
EDIT
TUNING TUNING
ENTER
MEMORY
TONE/SDB
TUNER
PRESET
BAND
CD-R MD
CD
123
654
987
CLEAR
TAPE
DISPLAY
VOLUME
FUNCTION
SLEEP
SYSTEM
POWER
PROG/
DIRECT
1
System remote
control unit
1
18Tr02m 46s
-60 -40 -30 -20 -12 -6 -2 0
L
dB
R
PUSH
ENTER
MINIDISC RECORDER DMD-M31
8
9
POWER LOADING MECHANISM
MULTI REC
CD SRS
MEMORY REC
CHARACTER/
TIME/INPUT
EDIT
ON / STANDBY
1
DMD-M31 (this unit)
1
Press the 1/3 (play/pause) button while a unit
other than the DMD-M31 (CD receiver or
Cassette deck) is playing.
• Playback on the currently playing unit stops.
At the same time, the CD receiver’s function
switches to “MD” and the MD starts playing.
✽ To perform this operation from the system
remote control unit, first turn the remote
control unit’s function select switch and set
the function to “MD”.
- MINIDISC RECORDER 1
- NOTE ON USE 2
- CAUTION: 2
- WARNING: 2
- FRONT PANEL 3
- REAR PANEL 3
- FEATURES 4
- CAUTIONS ON HANDLING 4
- PART NAMES AND FUNCTIONS 6
- REMOTE CONTROL UNIT 7
- (1) Inserting the batteries 8
- ABOUT MINIDISCS 9
- NORMAL PLAYBACK 9
- VARIOUS PLAYBACK FUNCTIONS 10
- 1/3 (play/pause) button 11
- Random Playback 12
- Repeat Playback 12
- RECORDING 13
- (2) Digital recording 14
- VARIOUS RECORDING FUNCTIONS 15
- Memory Recording 16
- GROUP FUNCTIONS 17
- 1 11 2,10 18
- 2. Playing groups 19
- (1) Playing One Group 19
- (2) Group Program Play 19
- 5. Cancel a group 20
- 7. Delete a group 20
- Editing functions 21
- [Erasing one track at a time] 21
- (1) Erasing tracks 21
- 1. Editing 21
- [Erasing all tracks] 22
- (2) Dividing tracks 23
- (3) Combining tracks 24
- (4) Moving tracks 24
- (1) Adding disc titles 25
- 1,3,4 2,6 26
- PICK REC function 27
- SYSTEM FUNCTIONS 28
- 18Tr02m 46s 29
- MESSAGES 30
- SYSTEM LIMITATIONS 30
- TROUBLESHOOTING 31
- MAIN SPECIFICATIONS 31
- Telephone: (03) 3837-5321 34
Related products and manuals for Car media receivers Denon UD-M31
(2 pages)© 2020, manymanuals.com. All rights reserved. | 1.126 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals