Denon DVD 2930CI Operations Instructions download pdf (Page 26)

ENGLISH

Making the initial settings Making the initial settings

Use [

DD HH

] to select the item to be set, then press

[ENTER].

Use [

DD HH

] to select “DIGITAL OUTPUT”, then press

[ENTER].

NORMAL (Upon purchase):

Select this when an AV amplifier with built-in Dolby Digital or DTS

decoder is connected to the DVD-2930CI’s digital audio output

terminal.

When playing discs recorded in Dolby Digital or DTS, the

corresponding bitstream signals are output.

Use this procedure to set the signal format of the digital audio output.

PCM:

When playing discs recorded in Dolby Digital or DTS, the signals are

converted to 48 kHz/16 bit PCM (2-channel) before being output.

Use [

DD HH

] to select the item to be set, then press

[ENTER].

Use [

DD HH

] to select “DOWN SAMPLING”, then

press [ENTER].

OFF (Upon purchase):

For DVDs recorded in linear PCM or packed PCM without copyright

protection, 2-channel audio signals of up to 96 kHz are output as

linear PCM signals with no conversion. (192 kHz and 176.4 kHz

signals are converted to 96 kHz and 88.2 kHz, respectively.)

ON:

Linear PCM or packed PCM signals are converted to 48 kHz or less

for output.

Set to “ON” when using digital connections to an AV amplifier

that is not compatible with sampling frequencies of 192 kHz,

176.4 kHz, 96 kHz and 88.2 kHz.

Digital output

Use this procedure to set the digital audio output when playing DVDs

recorded in linear PCM or packed PCM.

Downsampling

• For DVDs containing multi-channel PCM signals, the signals are

down-mixed into the 2-channels and output in digital format. (For

sources for which down-mixing is prohibited, only the FL and FR

channels are output.)

• When playing linear PCM or packed PCM DVDs with copyright

protection, due to considerations for the copyright holder, digital

output is not possible for sources of 48 kHz/16 bit or more.

To play such sources, either set to “ON”, use DENON LINK or

analog connections ( page 9, 10).

• When playing discs recorded in linear PCM or packed PCM, the

signals are output in linear PCM format, regardless of this setting.

Use [

DD HH

] to select the item to be set, then press

[ENTER].

Use [

DD HH

] to select “SOURCE DIRECT”, then press

[ENTER].

OFF (Upon purchase):

Select this when playing using the “SPEAKER SETUP” and “BASS

ENHANCER” settings.

Use this procedure to making the setting for direct audio output of the

disc’s data without making the “SPEAKER SETUP” settings at

“AUDIO CHANNEL”.

Making this setting allows you to enjoy full-band playback of all

channels, as recommended for DTS. (Note that this setting increases

the volume of the subwoofer by 5 dB, or 15 dB for Super Audio CDs.)

This setting also lets you enjoy playback of 6-channel DVD-Audio

sources recorded in full frequency band for all channels.

50kHz, 100kHz:

When playing Super Audio CDs, frequencies higher that these

respective frequencies are cut.

Set to “100kHz” when using an amplifier compatible with high

frequencies.

Source direct

Downloaded From Disc-Player.com Denon Manuals

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Comments to this Manuals

No comments

Denon DVD 2930CI Operations Instructions Page 26

Comments to this Manuals

Related products and manuals for DVD players Denon DVD 2930CI