Denon AVR 4806 - AV Receiver Operations Instructions Page 123

  • Download
  • Add to my manuals
  • Print
  • Page
    / 154
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 122
123
Advanced Setup – Part 2
Setting the Direct Mode Setup
1
Press the CURSOR
DD
or
HH
button to select the
“Direct Mode Setup” at the “Auto Setup /
Room EQ” menu, then press the
ENTER
button.
Display the “Direct Mode Setup” screen.
Perform the ON/OFF setting of Room EQ when the surround
mode is “DIRECT” or “PURE DIRECT”.
2
Press the CURSOR
FF
or
GG
button to select the
“ON” or “OFF”.
3
Press the ENTER button to enter the setting.
The “Auto Setup / Room EQ” menu reappears.
Setting the MIC Input Select
1
Press the CURSOR
DD
or
HH
button to select the
“Mic Input Select” at the “Auto Setup / Room
EQ” menu, then press the
ENTER button.
Display the “Mic Input Select” screen.
Sets whether the setup microphone is connected to the PIN
JACK (V.AUX L channel) connector or the MINI JACK (SETUP
MIC) connector.
2
Press the CURSOR
FF
or
GG
button to select the
“Mic” or “V.AUX L”.
3
Press the ENTER button to enter the setting.
The “Auto Setup / Room EQ” menu reappears.
Required Microphone for DENON Auto-Setup Room EQ : Product name Countryman B3
Requir
ed Microphone Amplifier Specification for DENON Auto-Setup Room EQ
Gain : 29 dB
•Frequency Response : 10 ~ 30 kHz Full Flat (Ex : Rane MS1b)
Micr
ophone Placement
Set the microphone using microphone stand, or other method, at the prime listening position.
Point the top of the microphone toward the ceiling.
Adjust the height so that the top of microphone to matches the height of your ear when sitting.
Micr
ophone Amplifier Gain Setting using Sound Level Meter and RMS Volt Meter
First you will need to adjust the “ microphone amplifier gain”.
(1) Connect the all speakers and the video monitor (for the on screen display) with the AVR-4806.
(2) Connect the microphone with the microphone amplifier.
(3) Turn on the AVR-4806 and the “microphone amplifier”.
(4) Turn on the “Phantom Supply” on the microphone amplifier.
Specifications and Setup Procedure for Non-DENON Microphone
Page view 122
1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 153 154

Comments to this Manuals

No comments