Denon AVR 4806 - AV Receiver Operations Instructions download pdf (Page 97)

Advanced Setup – Part 1

Setting the Component In Assign

• This setting assigns the component video input terminal of

the AVR-4806 for the different input sources.

Press the CURSOR

button to select the

“Component In Assign” at the “Video Setup”

menu, then press the

ENTER button.

• Display the “Component In Assign” screen.

Press the CURSOR

button to select the

input source, then press the

CURSOR

button to select the component video input

terminal.

Select from among 1-RCA to 3-RCA.

If the same component video input terminal is

selected, the setting for the input source that was

previously assigned switches to “NONE”.

If “Yes” is selected for “Default”, the settings are

reset to the default values.

Press the ENTER button to enter the setting.

• The “Video Setup” menu reappears.

Press the CURSOR

button to select the

input source, then press the

CURSOR

button to select the mode as below.

AUTO

Component

S-video Video OFF

AUTO:

When there are multiple input signals, the input

signals are detected and the input signal to be

output from the video monitor output terminal is

selected automatically in the following order:

component video, S-Video, composite video.

Component:

The signal connected to the component video

terminal is always played.

The component input signal is down–converted

and output from the composite and S-Video

monitor output terminal.

No image is output from the monitor output

terminal when there is no input signal to the

component input terminal.

S-Video:

The signal connected to the S-Video terminal is

always played.

The S-Video input signal is converted and output

from the composite and component monitor output

terminal.

Setting the Video Convert Mode

• Select the input signal to be output to the composite S-Video

and component monitor output terminals using the video

conversion function.

Press the CURSOR

button to select the

“Video Convert Mode” at the “Video Setup”

menu, then press the

ENTER button.

• Display the “Video Convert Mode” screen.

• If a monitor is connected with an HDMI cable but the

monitor is not compatible with HDMI audio signal playback,

only the video signals are output to the monitor from the

AVR-4806 (DVI mode).

Press the STATUS button to check which mode is set for

outputting HDMI signals from the AVR-4806 (HDMI and DVI

modes).

• Input signals input from the analog and digital terminals are

not output to the TV.

•With HDMI, the video and audio signals are transferred

simultaneously. When HDMI is assigned to an input source,

the digital audio input assignment switches to HDMI along

with the video input.

When this setting is made for input sources to which a digital

audio input (DENON LINK, IEEE1394 etc.) is previously

assigned, the digital audio assignment is set to HDMI.

In this case, reassign the digital input using the procedure

described at “Digital In Assign” ( page 89) and

“IEEE1394 Assign” ( page 92).

The details in each mode are as follows.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 153 154

Comments to this Manuals

No comments

Denon AVR 4806 - AV Receiver Operations Instructions Page 97

Comments to this Manuals

Related products and manuals for Receiver Denon AVR 4806 - AV Receiver