Denon AVR-3300 User Manual Page 59
- Page / 62
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
59
ENGLISH
Surround
The AVR-3300 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same
sense of presence as in a movie theater.
Dolby Surround
(1) Dolby Digital (Dolby Surround AC-3)
Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories.
Dolby Digital consists of up to “5.1” channels - front left, front right, center, surround left, surround right, and an additional channel exclusively
reserved for additional deep bass sound effects (the Low Frequency Effects – LFE – channel, also called the “.1” channel, containing bass
frequencies of up to 120 Hz).
Unlike the analog Dolby Pro Logic format, Dolby Digital’s main channels can all contain full range sound information, from the lowest bass, up
to the highest frequencies – 22 kHz. The signals within each channel are distinct from the others, allowing pinpoint sound imaging, and Dolby
Digital offers tremendous dynamic range from the most powerful sound effects to the quietest, softest sounds, free from noise and distortion.
2 Dolby Digital and Dolby Pro Logic
Comparison of home surround systems Dolby Digital Dolby Pro Logic
No. recorded channels (elements) 5.1 ch 2 ch
No. playback channels 5.1 ch 4 ch
Playback channels (max.) L, R, C, SL, SR, SW L, R, C, S (SW - recommended)
Audio processing
Digital discrete processing
Dolby Digital (AC-3) encoding/decoding
Analog matrix processing Dolby Surround
High frequency playback limit of surround
channel
20 kHz 7 kHz
2 Dolby Digital compatible media and playback methods
Marks indicating Dolby Digital compatibility: and .
The following are general examples. Also refer to the player’s operating instructions.
LD (VDP)
Coaxial Dolby Digital RF output jack
*
1
Set the input mode to “AUTO”.
(Page 38)
DVD
Optical or coaxial digital output
(same as for PCM)
*
2
Set the input mode to “AUTO”.
(Page 38)
Others
(satellite broadcasts, CATV, etc.)
Optical or coaxial digital output
(same as for PCM)
Set the input mode to “AUTO”.
(Page 38)
Media Dolby Digital output jacks Playback method (reference page)
*
1 Please use a commercially available adapter when connecting the Dolby Digital RF (AC-3RF) output jack of the LD player to the digital input
jack.
Please refer to the instruction manual of the adapter when making connection.
*
2 Some DVD digital outputs have the function of switching the Dolby Digital signal output method between “bit stream” and “(convert to)
PCM”. When playing in Dolby Digital surround on the AVR-3300, switch the DVD player’s output mode to “bit stream”. In some cases
players are equipped with both “bit stream + PCM” and “PCM only” digital outputs. In this case connect the “bit stream + PCM” jacks to
the AVR-3300.
- AVR-3300 1
- CAUTION: 2
- ATTENTION 2
- WARNING: 2
- ENGLISHFRANCAIS 3
- SAFETY INSTRUCTIONS 4
- INTRODUCTION 5
- ACCESSORIES 5
- CAUTIONS ON HANDLING 6
- FEATURES 6
- CONNECTIONS 7
- Connecting video components 8
- BCB CRCRYCB CR 9
- 75 Ω/ohms COAXIAL CABLE 10
- Jacks (DVD Player) 11
- Another room 12
- Speaker system connections 13
- Protector circuit 14
- Note on speaker impedance 14
- PART NAMES AND FUNCTIONS 15
- Remote control unit 16
- SETTING UP THE SYSTEM 17
- Before setting up the system 19
- Setting the type of speakers 19
- Setting the bass output 20
- Setting the delay time 21
- Setting the channel level 23
- Setting the digital inputs 25
- EXT. IN & MULTI 26
- Auto tuner presets 27
- After completing system setup 28
- REMOTE CONTROL UNIT 29
- SET CALL OFF 30
- Preset memory 31
- (VCR-2/V.AUX) 32
- ON SCREEN 33
- Learning function 34
- System call function 35
- OPERATION 37
- Playing the input source 38
- ANALOG DIGITAL 39
- After starting playback 40
- RECOUT SOURCE 41
- M-SOURCE SOURCE 41
- FUNCTION 42
- NPUT MODE 43
- SURROUND 44
- Fader function 45
- Dolby Surround Pro Logic mode 45
- INPUT MODE 46
- DOLBY / DTS 46
- DIAL.NORM 47
- OFFSET - 4dB 47
- DSP SURROUND SIMULATION 48
- DSP surround simulation 49
- Tone control setting 51
- LISTENING TO THE RADIO 52
- Auto tuning 53
- Manual tuning 53
- Checking the preset stations 54
- LAST FUNCTION MEMORY 55
- TROUBLESHOOTING 56
- ADDITIONAL INFORMATION 57
- Speaker setting examples 58
- Surround 59
- DTS Digital Surround 60
- Surround modes and parameters 61
- SPECIFICATIONS 62
Related products and manuals for Receivers and Amplifiers Denon AVR-3300
(2 pages)
(2 pages)© 2020, manymanuals.com. All rights reserved. | 0.148 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals