Denon AVR-3300 User Manual download pdf (Page 62)

ENGLISH

SPECIFICATIONS

2 Audio section

• Power amplifier

Rated output: Front: 105 W + 105 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)

140 W + 140 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.)

Center: 105 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)

140 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.)

Surround: 105 W + 105 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)

140 W + 140 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.)

(for multiple voltage and Taiwan R.O.C. models)

Front: 170 w + 170 W (6 Ω/ohms, EIAJ)

Center: 170 W (6 Ω/ohms, EIAJ)

Surround: 170 W + 170 W (6 Ω/ohms, EIAJ)

Dynamic power: 140 W x 2 ch (8 Ω/ohms)

210 W x 2 ch (4 Ω/ohms)

240 W x 2 ch (2 Ω/ohms)

Output terminals: Front/Center: 6 ~ 16 Ω/ohms

Surround: A or B 6 ~ 16 Ω/ohms

A + B 8 ~ 16 Ω/ohms

• Analog

Input sensitivity / input impedance: 200 mV / 47 kΩ/kohms

Frequency response: 10 Hz ~ 50 kHz: +0, –3 dB (DIRECT mode)

S/N: 102 dB (DIRECT mode)

Distortion: 0.01% (20 Hz ~ 20 kHz) (DIRECT mode)

Rated output/maximum output: 1.2 V / 8 V

• Digital

D/A output: Rated output — 2 V (at 0 dB playback)

Total harmonic distortion — 0.008% (1 kHz, at 0 dB)

S/N ratio — 102 dB

Dynamic range — 96 dB

Digital input: Format — Digital audio interface

• Phono equalizer (PHONO input — REC OUT)

Input sensitivity: 2.5 mV

RIAA deviation: ±1 dB (20 Hz to 20 kHz)

Signal-to-noise ratio: 74 dB (A weighting, with 5 mV input)

Rated output / Maximum output: 150 mV / 8 V

Distortion factor: 0.03% (1 kHz, 3 V)

2 Video section

• Standard video jacks

Input / output level and impedance: 1 Vp-p, 75 Ω/ohms

Frequency response: 5 Hz ~ 10 MHz — +0, –3 dB

• S-video jacks

Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohms

C (color) signal — 0.286 Vp-p, 75 Ω/ohms

Frequency response: 5 Hz ~ 10 MHz — +0, –3 dB

• Color component video jacks

Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohms

Cb (blue) signal — 0.7 Vp-p, 75 Ω/ohms

Cr (red) signal — 0.7Vp-p, 75 Ω/ohms

Frequency response: 5 Hz ~ 20 MHz — +0, –3 dB

2 Tuner section

[FM] (note: µV at 75 Ω/ohms, 0 dBf=1 x 10

–15

W) [AM]

Reseiving Range: 87.50 MHz ~ 107.90 MHz 520 kHz ~ 1710 kHz

(for North America model) (for North America model)

87.50 MHz ~ 108.00 MHz 522 kHz ~ 1611 kHz

(

for Multiple voltage and Taiwan R.O.C. models

)(

for Multiple voltage and Taiwan R.O.C. models

)

Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV

50 dB Quieting Sensitivity: MONO 1.6 µV (15.3 dBf)

STEREO 23 µV (38.5 dBf)

S/N (IHF-A): MONO 80 dB

STEREO 75 dB

Total Harmonic Distortion (at 1 kHz): MONO 0.15%

STEREO 0.3%

2 General

Powr supply: AC 120 V, 60 Hz (for North America model)

AC 115/230 V, 50/60 Hz (for Multiple voltage and Taiwan R.O.C. models)

Power consumption: 5.6 A (for Norh America model)

320 W (for Multiple voltage and Taiwan R.O.C. models)

Maximum external dimensions: 434 (W) x 171 (H) x 416 (D) mm (17-3/32” x 6-11/32” x 16-3/8”)

Weight: 15.0 kg (33 lbs 2 oz)

2 Remote control unit (RC-860)

Batteries: R6P/AA Type (two batteries)

External dimensions: 70 (W) x 215 (H) x 24 (D) mm (2-3/4” x 8-15/32” x 15/16”)

Weight: 200 g (Approx. 7 oz) (including batteries)

For purposes of improvement, specifications and design are subject to change without notice.

1 2 ... 57 58 59 60 61 62

Comments to this Manuals

No comments

Denon AVR-3300 User Manual Page 62

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Denon AVR-3300