Denon AVR-4806CI User Manual download pdf (Page 117)

117

Advanced Setup – Part 1

S. Back:

If no surround back speakers are used in the main

room, their amplifier channels can be assigned for

other uses, or one of the two channels can drive

one surround back speaker in the main room, while

the other channel can drive a monaural speaker in

another zone.

• Front:

This provides a bi-amp mode for the two main front

speakers, replicating the front left and front right

amplifier channels’ outputs.

• Front B:

Both surround back power amplifier channels can

be used to provide a second set of stereo outputs

that match the front left and right speakers,

providing a Front B option for stereo sound in

another location ( page 111).

• ZONE2:

This mode assigns the Surround Back amplifier

channels to provide ZONE2 speaker-level outputs

from the Surround Back speaker terminals, with

the option of monaural or stereo operation

depending on the “Channel Setup” setting.

• ZONE3:

This mode assigns the Surround Back amplifier

channels to provide ZONE3 speaker-level outputs

from the Surround Back speaker terminals, with

the option of monaural or stereo operation

depending on the “Channel Setup” setting.

• SB/Z2:

When only one surround back speaker is used in

the main room (connected to the SBL speaker

terminals), the surround back right amplifier

channel can be used to provide monaural output to

a speaker located in ZONE2.

• SB/Z3:

When only one surround back speaker is used in

the main room (connected to the SBL speaker

terminals), the surround back right amplifier

channel can be used to provide monaural output to

a speaker located in ZONE3.

• Z2/Z3:

When no surround back speakers are used in the

main room, this mode provides monaural sound to

a speaker in ZONE2 connected to the SBL speaker

terminals, with monaural sound to a speaker in

ZONE3 connected to the SBR speaker terminals.

• SB/– – –:

Only the Surround Back Left speaker terminals are

active.

• – – –:

Both Surround Back speaker terminals are inactive.

Front Bi-Amp connections

Certain loudspeakers are equipped with two sets of input

terminals, for bi-amplification. The AVR-4806CI Amp

Assign mode allows you to power bi-amp-capable

speakers with two amplifier channels. Be sure to consult

the operating instructions of your bi-amp-capable speakers

for further information before proceeding.

AVR-4806CI

SPEAKER

NOTE:

• When making bi-amp connections, be sure to remove

the short-circuiting bar included with the speaker.

• The “SB/Z2”, “SB/Z3” and “SB/- - -” modes can only be

selected when the surround back speaker configuration is

set to “1spkr”.

• The “Z2/Z3” mode can only be selected if the playback

channels are configured as monaural (“Mono”) in the

“Channel Setup” menu.

Press the ENTER button to enter the setting.

• The “Option Setup” menu reappears.

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 201 202

Comments to this Manuals

No comments

Denon AVR-4806CI User Manual Page 117

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-4806CI